On Nov 26 2000, kmself@ix.netcom.com wrote:
> on Sat, Nov 25, 2000 at 11:50:15PM -0600, Joseph Anthony ([EMAIL PROTECTED])
> wrote:
> > hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
> > hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> > hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
> > hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> > hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
> > hdb: timeout waiting for DMA
>
> You may have a bad drive. Or you could have problems with DMA, though I
> don't particularly understand it.
One common cause of the BadCRC messages is when one is using
UDMA/66 without an 80-way cable. To the original poster: try
to use hdparm(8) to see if disabling UDMA/66 solves (if you
are using UDMA/66, that is).
There was a long discussion about this in the LKML some time
ago and I've also learned this lesson the hard way.
[]s, Roger...
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Rogerio Brito - [EMAIL PROTECTED] - http://www.ime.usp.br/~rbrito/
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
