> On Sat, Oct 21, 2000 at 09:10:08AM +0200, Shaul Karl wrote: > <snip> > > > > > I configure isdn with the prepared script that came with debian > > > isdnutils package and those that are generate by isdnconfig utilities > > > (and modified by hand). > > > > > > Now the problem is that the card do not compose number at all. > > > > > > > > > What do you mean? What are you getting after issuing: > > > > isdnctrl dial ippp0 > > > > I would also try using minicom and some ttyI just to see that I can reach > > my > > ISP. > > It means that I'm very stupid :(I wasn't doing that last time .. argh!) > > Ok, I've checked the error message and fixed eaz and remote number, > thank to you. > > Now it seems that the problem is on my isp, or on my ipppd > configuration. > > After I've enabled debugging, I can see nothing is sent by remote > host. I use pap (supported by isp) the option ipppd are: >
You are wrong. Much is sent by the remote host: you can see in your log that your host sends and receive (send and recv). I believe that you should play a bit with ipppd options. I do not know much about it. Perhaps the man page or the PPP-HOWTO can help? As far as i remember the PPP-HOWTO has a detailed log of a full debug connection. Perhaps Maybe you should also try debian-user again with a subject like "what ipppd options should be changed?" and attach your log. What other log files might show (debug, messages)? > debug > lock > +pwlog > user crxop > papcrypt > +pap > noccp > nolzs > noipdefault > netmask 255.255.255.255 > defaultroute > mtu 1500 > ipcp-accept-local > ipcp-accept-remote > noipx > > I'm configuring it as pointopoint. > > > .. <snip> > > > > In addition to the your init messages I have: > >... > > Oct 16 07:39:30 rakefet kernel: ippp0: dialing 0 7251111... > > Oct 16 07:39:31 rakefet lpd[230]: restarted > > Oct 16 07:39:31 rakefet ipppd[222]: Local number: 35298903, Remote number: > > 9277777, Type: outgoing > > Oct 16 07:39:31 rakefet ipppd[222]: PHASE_WAIT -> PHASE_ESTABLISHED, > > ifunit: > > 0, linkunit: 0, fd: 8 > > Oct 16 07:39:31 rakefet kernel: isdn_net: ippp0 connected > > Oct 16 07:39:32 rakefet ipppd[222]: Remote message: > > Oct 16 07:39:32 rakefet ipppd[222]: MPPP negotiation, He: No We: No > > Oct 16 07:39:32 rakefet ipppd[222]: local IP address 212.179.144.29 > > Oct 16 07:39:32 rakefet ipppd[222]: remote IP address 212.25.92.5 > > Now here is the problem: no Remote message and no MPPP negotiation: > > Oct 21 13:35:28 localhost kernel: ippp0: dialing 1 0503190000... > Oct 21 13:35:31 localhost kernel: isdn_net: ippp0 connected > Oct 21 13:35:31 localhost kernel: isdn_net: chargetime of ippp0 now 6273230 > Oct 21 13:35:31 localhost ipppd[3593]: Local number: 050970953, Remote > number: 0503190000, Type: outgoing > Oct 21 13:35:31 localhost ipppd[3593]: PHASE_WAIT -> PHASE_ESTABLISHED, > ifunit: 0, linkunit: 0, fd: 8 > Oct 21 13:35:31 localhost ipppd[3593]: sent [0][LCP ConfReq id=0x1 <mru 1500> > <auth pap> <magic 0xfd88ea1b> <pcomp> <accomp>] > Oct 21 13:35:31 localhost ipppd[3593]: rcvd [0][LCP ConfReq id=0x5b <auth > chap md5> <magic 0xdf636eec> <MPmrru 0x5f4> <MPdiscr: 0x1 [ 72 73 35 38 30 30 > 2d 70 69 2d 31 ]>] > Oct 21 13:35:31 localhost ipppd[3593]: sent [0][LCP ConfRej id=0x5b <MPmrru > 0x5f4>] > Oct 21 13:35:31 localhost ipppd[3593]: rcvd [0][LCP ConfAck id=0x1 <mru 1500> > <auth pap> <magic 0xfd88ea1b> <pcomp> <accomp>] > Oct 21 13:35:31 localhost ipppd[3593]: rcvd [0][LCP ConfReq id=0x5c <auth > chap md5> <magic 0xdf636eec> <MPdiscr: 0x1 [ 72 73 35 38 30 30 2d 70 69 2d 31 > ]>] > Oct 21 13:35:31 localhost ipppd[3593]: sent [0][LCP ConfNak id=0x5c <auth > pap>] > Oct 21 13:35:31 localhost ipppd[3593]: rcvd [0][LCP ConfReq id=0x5d <auth > pap> <magic 0xdf636eec> <MPdiscr: 0x1 [ 72 73 35 38 30 30 2d 70 69 2d 31 ]>] > Oct 21 13:35:31 localhost ipppd[3593]: sent [0][LCP ConfAck id=0x5d <auth > pap> <magic 0xdf636eec> <MPdiscr: 0x1 [ 72 73 35 38 30 30 2d 70 69 2d 31 ]>] > Oct 21 13:35:31 localhost ipppd[3593]: lcp layer is UP > Oct 21 13:35:31 localhost ipppd[3593]: sent [0][PAP AuthReq id=0x1 > user="crxop" password="<my_password_here_is_ok>"] > Oct 21 13:35:31 localhost ipppd[3593]: rcvd [0][PAP AuthAck id=0x1msg=""] > Oct 21 13:35:31 localhost ipppd[3593]: Remote message: > Oct 21 13:36:01 localhost ipppd[3593]: sent [0][LCP TermReq id=0x2 61 75 74 > 68 20 66 61 69 6c 75 72 65] > Oct 21 13:36:01 localhost ipppd[3593]: rcvd [0][LCP TermAck id=0x2] > Oct 21 13:36:01 localhost ipppd[3593]: Connection terminated. > > > [08:56:08 /tmp]$ exit > > exit > > Now that the interface is ok, I still need to test with seyon? > Does all the above was taken while testing with seyon? > -- > Daniele Cruciani <[EMAIL PROTECTED]> > Universita` di Pisa - Informatica - > http://www.cli.di.unipi.it/~cruciani/ -- Shaul Karl <[EMAIL PROTECTED]>
