I suggest deleting the '1006' line from /etc/chatscripts/provider and commenting out 'mtu 1006' from /etc/ppp/peers/provider and then try connecting again. Send the log results to the list.
Dwight -- Dwight Johnson [EMAIL PROTECTED] On Sun, 15 Oct 2000, Shaji N V wrote: > The scripts are here: > I have changed my login/password > > /etc/chatscripts/provider > ABORT BUSY > ABORT "NO CARRIER" > ABORT VOICE > ABORT "NO DIALTONE" > TIMEOUT 120 > "" ATDT2022508111 > ogin mylogin > word \qmypassword > 1006 "" > > /etc/ppp/peers/provider ( I have tried with speeds 57600 and 115200) > > # These are the options to dial out to your default service provider. > # Please customize them correctly. Only the "provider" file will be > # handled by poff and pon (unless with extra command line arguments). > > # You usually need this if there is no PAP authentication > noauth > > # The chat script (be sure to edit that file, too!) > connect "/usr/sbin/chat -v -f /etc/chatscripts/provider" > > # Set up routing to go through this PPP link > defaultroute > > # Default modem (you better replace this with /dev/ttySx!) > /dev/ttyS4 > > # Speed > 115200 > > # Keep modem up even if connection fails > persist > > /etc/ppp/options - provided by ISP. > > # /etc/ppp/options > # > # Prevent pppd from forking into the background > -detach > # > # use the modem control lines > modem > # use uucp style locks to ensure exclusive access to the serial device > lock > # use hardware flow control > crtscts > # create a default route for this connection in the routing table > defaultroute > # do NOT set up any "escaped" control sequences > asyncmap 0 > # use a maximum transmission packet size of 552 bytes > mtu 1006 > # use a maximum receive packet size of 552 bytes > #mru 552 > # > # force pppd to use your ISP user name as your 'host name' during the > # authentication process > #name > # > # If you are running a PPP *server* and need to force PAP or CHAP > # uncomment the appropriate one of the following lines. Do NOT use > # these is you are a client connecting to a PPP server (even if it uses PAP > # or CHAP) as this tells the SERVER to authenticate itself to your > # machine (which almost certainly can't do - and the link will fail). > #+chap > #+pap > # > # If you are using ENCRYPTED secrets in the /etc/ppp/pap-secrets > # file, then uncomment the following line. > # Note: this is NOT the same as using MS encrypted passwords as can be > # set up in MS RAS on Windows NT. > #+papcrypt > # Increase debugging level (same as -d). If this option is given, pppd > # will log the contents of all control packets sent or received in a > # readable form. The packets are logged through syslog with facility > # daemon and level debug. This information can be directed to a file by > # setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If > # pppd is compiled with extra debugging enabled, it will log messages > # using facility local2 instead of daemon). > debug > > > Thanks for your time and help, > Shaji > > > _________________________________________________________________________ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > Share information about yourself, create your own public profile at > http://profiles.msn.com. >
