Well, from the suggestions I've gotten from people, it looked easy enough
to get going, but I don't believe everything is correct. I've dumped about
all the info I could think of below, in the hope that someone notices any
problem(s) I may have.
Also, what is the best way to test to see if it's working? I couldn't get
it to play a music CD (or even recognize it, another problem?), and none
of the *.wav files in gnome setup would play.
Thanks,
John
-----
/dev/sndstat:
OSS/Free:3.8s2++-971130
Load type: Driver loaded as a module
Kernel: Linux jupiter 2.2.17 #1 Sun Aug 13 20:24:22 CDT 2000 i686
Config options: 0
Installed drivers:
Card config:
Audio devices:
0: Sound Blaster 16 (4.16) (DUPLEX)
Synth devices:
Midi devices:
0: Sound Blaster 16
Timers:
0: System clock
Mixers:
0: Sound Blaster
-----
/etc/modules (important part):
sound
sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330
-----
/etc/isapnp.conf (skipping comments):
(READPORT 0x0273)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
(CONFIGURE CTL00e4/515754242 (LD 0
(INT 0 (IRQ 5 (MODE +E)))
(DMA 0 (CHANNEL 1))
(DMA 1 (CHANNEL 5))
(IO 0 (SIZE 16) (BASE 0x0220))
(IO 1 (SIZE 2) (BASE 0x0330))
(IO 2 (SIZE 4) (BASE 0x0388))
(NAME "CTL00e4/515754242[0]{Audio }")
(ACT Y)
))
(CONFIGURE CTL00e4/515754242 (LD 1
(IO 0 (SIZE 8) (BASE 0x0200))
(NAME "CTL00e4/515754242[1]{Game }")
(ACT Y)
))
(CONFIGURE CTL00e4/515754242 (LD 2
(IO 0 (SIZE 4) (BASE 0x0620))
(IO 1 (SIZE 4) (BASE 0x0A20))
(IO 2 (SIZE 4) (BASE 0x0E20))
(NAME "CTL00e4/515754242[2]{WaveTable }")
(ACT Y)
))
(WAITFORKEY)
-----
/sbin/lsmod (skipping ip_masq stuff):
Module Size Used by
sb 32820 0
uart401 6096 0 [sb]
sound 55448 0 [sb uart401]
soundlow 344 0 [sound]
soundcore 2372 6 [sb sound]
