Hi, I have'nt followed the thread, so it could be that i repeat someones answer. But here it goes anyway:
If you want to boot from an scsi-disk in a mixed ide-scsi setup
then do the following:
1. set your bios to boot from scsi first
2. tell LILO about this with (lilo.conf)
disk=/dev/sda
bios=0x80
disk=/dev/hda
bios=0x81
boot=/dev/sda
3. rerun LILO
You can read the LILO Postscript manual for more info.
Good Luck
R.Stallknecht
