hi all,
quick ipfwadm question.
ethernet cards are as so:
eth0 Link encap:Ethernet HWaddr 00:00:E8:74:32:FD
inet addr:192.168.20.254 Bcast:192.168.20.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3042 errors:0 dropped:0 overruns:0
TX packets:1038 errors:0 dropped:0 overruns:0
Interrupt:10 Base address:0xfca0
eth1 Link encap:Ethernet HWaddr 00:00:E8:D6:D5:21
inet addr:203.17.240.6 Bcast:203.17.240.255 Mask:255.255.255.224
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:14850 errors:0 dropped:0 overruns:0
TX packets:1203 errors:0 dropped:0 overruns:0
Interrupt:11 Base address:0xfcc0
machine running IP masquerading for a 192.168.20 network. Through eth0 i can
ping all internal machines (who are getting IP's off dhcp running off the
eth0 of this machine). Through eth1 i can ping sites outside on the net.
[EMAIL PROTECTED] init.d]# ipfwadm -I -l
IP firewall input rules, default policy: accept
[EMAIL PROTECTED] init.d]# ipfwadm -O -l
IP firewall output rules, default policy: accept
[EMAIL PROTECTED] init.d]# ipfwadm -F -l
IP firewall forward rules, default policy: accept
type prot source destination ports
acc/m all 192.168.20.0/24 anywhere n/a
None of the 192.168.20 machines can get anything out on the web. (nor any
other sort of traffic for that matter). I'm assuming there is a problem with
the masquerading.
Am i missing anything here?
Regards,
Marc-Adrian Napoli
Connect Infobahn Australia
+61 2 92811750
