After slightly breaking my home system attempting to downgrade
from glibc2.1 back to full slink, I lost the use of bash and
_fixed_ my system by manually unpacking base again and fugding
with the status file.
But now ppp won't work anymore, I originally got it to work by
simply replying to pppconfig's question, but now pppd refuses to
use mschap authentification:
pppd[202]: Serial connection established.
pppd[202]: Using interface ppp0
pppd[202]: Connect: ppp0 <--> /dev/ttyS3
pppd[202]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap 05> <magic
0xc2af944b> <pcomp> <accomp>]
pppd[202]: rcvd [LCP ConfReq id=0x0 <asyncmap 0x0> <auth chap 80> <magic
0x5a15> <pcomp> <accomp>]
pppd[202]: sent [LCP ConfNak id=0x0 <auth pap>]
pppd[202]: rcvd [LCP ConfRej id=0x1 <auth chap 05>]
pppd[202]: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0xc2af944b> <pcomp>
<accomp>]
pppd[202]: rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap 80> <magic
0x5a15> <pcomp> <accomp>]
pppd[202]: sent [LCP ConfNak id=0x1 <auth pap>]
pppd[202]: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <magic 0xc2af944b> <pcomp>
<accomp>]
pppd[202]: rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <auth chap 80> <magic
0x5a15> <pcomp> <accomp>]
pppd[202]: sent [LCP ConfNak id=0x2 <auth pap>]
pppd[202]: rcvd [LCP ConfReq id=0x3 <asyncmap 0x0> <auth chap 80> <magic
0x5a15> <pcomp> <accomp>]
pppd[202]: sent [LCP ConfNak id=0x3 <auth pap>]
pppd[202]: rcvd [LCP ConfReq id=0x4 <asyncmap 0x0> <auth chap 80> <magic
0x5a15> <pcomp> <accomp>]
pppd[202]: sent [LCP ConfNak id=0x4 <auth pap>]
pppd[202]: rcvd [LCP ConfReq id=0x5 <asyncmap 0x0> <auth chap 80> <magic
0x5a15> <pcomp> <accomp>]
pppd[202]: sent [LCP ConfRej id=0x5 <auth chap 80>]
pppd[202]: rcvd [LCP TermReq id=0x6 00 00 02 dc]
pppd[202]: sent [LCP TermAck id=0x6]
pppd[202]: Hangup (SIGHUP)
pppd[202]: Modem hangup
pppd[202]: Connection terminated.
pppd[202]: Exit.
However, it's possible that some hardware is now broken, beacuse
I also sometimes don't get as far as that and chat fails
immediately with a kernel fault:
pppd[746]: pppd 2.3.5 started by root, uid 0
chat[747]: abort on (BUSY)
chat[747]: abort on (NO CARRIER)
chat[747]: abort on (VOICE)
chat[747]: abort on (NO DIALTONE)
chat[747]: abort on (NO ANSWER)
chat[747]: send (ATZ^M)
kernel: general protection: 0000
kernel: CPU: 0
pppd[746]: Exit.
Any clues? (I probably need to wipe it clean and reinstall...)
--
Peter Galbraith, research scientist <[EMAIL PROTECTED]>
Maurice Lamontagne Institute, Department of Fisheries and Oceans Canada
P.O. Box 1000, Mont-Joli Qc, G5H 3Z4 Canada. 418-775-0852 FAX: 775-0546
6623'rd GNU/Linux user at the Counter - http://counter.li.org/
