On Tue, Nov 23, 1999 at 05:17:28PM +0100, Petru NOTINGHER wrote > Hello. > > I've recently upgraded to the latest version of lprng, and I have the > following problem. > > I have a network printer, and I declared its address in /etc/printcap. > > When I print a file, everything seems allright, except the printer prints > nothing. > > I tried lpd, the result is the same. However, everything worked fine before. > > Does anybody know something about this ? > > Here are the /etc/printcap and the output of lprng : > > **************************************************************************************** > > # This file was generated by /usr/sbin/magicfilterconfig. > # > lp|nc60|XEROX NC 60:\ > > :lp=/dev/null:sd=/var/spool/lpd/nc60:rm=162.38.204.20:rp=nc60:lpr_bounce > :\ > :sh:pw#80:pl#72:px#1440:mx#0:\ > :if=/etc/magicfilter/ps600-filter:\ > :af=/var/log/lp-acct:lf=/var/log/lp-errs: > :send_data_first: >
Someone had a similar problem a while ago; the solution then was to change ":lp=/dev/null:" to just ":lp=:". Try that. John P. -- [EMAIL PROTECTED] [EMAIL PROTECTED] "Oh - I - you know - my job is to fear everything." - Bill Gates in Denmark
