Hi All,
Using Debian 2.1 on a P166, 64 M RAM, Adaptec 2940W, Cheetah 4 GB,
Asus P55T2P4 MB.
All was well until I tried to setup UUCP which resulted in the Aiee at the
end of this message. I thought UUCP was the culprit but cu and mgetty cause
the same problems. Man.., I thought serial port drivers were under control!
The same hardware worked fine with 2.0. Any ideas appreciated.
Thanks..
~# dmesg|more
all Trace: [<0011858f>] [<0010a7df>]
Code: <1>Unable to handle kernel paging request at virtual address c501ad98
current->tss.cr3 = 034f5000, %cr3 = 034f5000
*pde = 0009e067
*pte = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<0010ad48>]
EFLAGS: 00010212
eax: 00000010 ebx: 0000002b ecx: 0501ad98 edx: 003e1810
esi: 00000000 edi: 003e7000 ebp: 003e6f68 esp: 003e6f0c
ds: 0018 es: 0018 fs: 0010 gs: 002b ss: 0018
Process mgetty (pid: 18216, process nr: 22, stackpage=003e6000)
Stack: 0000002b 00000000 0001a000 003e6f68 02b7ec0c 05000000 05800000
05000000
02b70018 00111b6a 001b058d 003e6f68 00000000 0011189c fffffff0
00000010
001eeb00 00177295 00f8ff18 03592264 0010a9b0 003e6f68 00000000
00000010
Call Trace: [<05000000>] [<05800000>] [<05000000>] [<00111b6a>] [<0011189c>]
[<0
0177295>] [<0010a9b0>]
[<0501ad98>] [<0501ad98>] [<0011858f>] [<0010a7df>]
Code: 64 8a 04 0e 0f a1 88 c2 81 e2 ff 00 00 00 89 54 24 10 52 68
Aiee, killing interrupt handler
