use 2.3.x kernel for ata/66 make sure there is no device on the 2nd channeln for the ata/66 or the machine will crash
nate On Thu, 4 Nov 1999, Sudhakar Chandrasekharan wrote: thaths >How do I compile ATA/66 support into the kernel? And what version of the thaths >kernel should I use? The slink boot floppies have 2.0.36 and this kernel thaths >is not currently recogonizing my ide2 and ide3 interfaces. thaths > thaths >Here is my setup: thaths > thaths >Abit BP6 MoBo. thaths >128M PC100 SDRAM thaths >2 * 466MHz Celeron PPGA thaths > thaths >ide0 (ATA/33) Matshita ATAPI CDROM (master) thaths >ide1 (ATA/33) nothing thaths >ide2 (ATA/66) Western Digital 20.5 G HDD (supports ATA/66) thaths >ide3 (ATA/66) nothing thaths > thaths >scsi0 Tekram 390U Ultra Wide II card (ncr53x875E) thaths >sda Quantum 9.1G HDD thaths > thaths >Another strange problem I have been having. When I install slink (on thaths >/dev/sda) the ncr SCSI controller is detected fine. No SCSI errors even thaths >when doing a lot of disk I/O. But the kernel is UP. When I compile a thaths >custom kernel (2.0.36 or 2.2.13) for SMP with support for ncr53c8xx and / thaths >or sym53c8xx I keep getting time-out messages from the scsi driver like the thaths >following whenever I do a lot of disk I/O (like an apt-get upgrade pointing thaths >to potato): thaths > thaths >scsi : aborting command due to timeout : pid 6167, scsi0, channel 0, id 0, thaths >lun 0 Write (10) 00 00 8f f7 27 00 00 02 00 thaths >sym53c8xx_abort: pid=6167 serial_number=6182 serial_number_at_timeout=6182 thaths >SCSI host 0 abort (pid 6167) timed out - resetting thaths >SCSI bus is being reset for host 0 channel 0. thaths >sym53c8xx_reset: pid=6167 reset_flags=2 serial_number=6182 thaths >serial_number_at_timeout=6182 thaths >sym53c875E-0: restart (scsi reset). thaths >sym53c875E-0: Downloading SCSI SCRIPTS. thaths >sym53c875E-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16) thaths >scsi : aborting command due to timeout : pid 6572, scsi0, channel 0, id thaths >0, lun 0 Write (10) 00 00 8f f7 0f 00 00 02 00 thaths >sym53c8xx_abort: pid=6572 serial_number=6599 thaths >serial_number_at_timeout=6599 thaths >SCSI host 0 abort (pid 6572) timed out - resetting thaths >SCSI bus is being reset for host 0 channel 0. thaths >sym53c8xx_reset: pid=6572 reset_flags=2 serial_number=6599 thaths >serial_number_at_timeout=6599 thaths >sym53c875E-0: restart (scsi reset). thaths >sym53c875E-0: Downloading SCSI SCRIPTS. thaths >sym53c875E-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16) thaths > thaths > thaths >Thaths thaths >-- thaths >"Now, what is a wedding? Well, Webster's Dictionary describes a wedding thaths > as, 'The process of removing weeds from one's garden.'" thaths > -- Homer J. Simpson thaths >Sudhakar C13n http://people.netscape.com/thaths/ Lead Indentured Slave thaths > thaths > thaths >-- thaths >Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null thaths > ----------------------------------------[mailto:[EMAIL PROTECTED] ]-- Vice President Network Operations http://www.firetrail.com/ Firetrail Internet Services Limited http://www.aphroland.org/ Everett, WA 425-348-7336 http://www.linuxpowered.net/ Powered By: http://comedy.aphroland.org/ Debian 2.1 Linux 2.0.36 SMP http://yahoo.aphroland.org/ -----------------------------------------[mailto:[EMAIL PROTECTED] ]-- 8:30am up 77 days, 19:58, 1 user, load average: 0.43, 0.37, 0.33
