On Thu, Oct 28, 1999 at 09:54:02AM +0200, Rune Linding Raun wrote:
> a lsmod here gives:
>
> opl3sa2 3400 1
> ad1848 15060 1 [opl3sa2]
> mpu401 17676 1 [opl3sa2]
>
> and in conf.modules:
>
> options opl3sa2 io=0x100 io=0x201 io=0x220 mss_io=0x530 mpu_io=0x370
> irq=5 dma=0 dma2=1
>
I prefer ALSA driver. Here is my /etc/conf.modules configuration:
alias char-major-116 snd
options snd snd_major=116 snd_cards_limit=1
alias snd-card-0 snd-card-opl3sa2
options snd-card-opl3sa2 snd_port=0x240 snd_wss_port=0xe80 snd_midi_port=0x300
snd_fm_port=0x388 snd_irq=10 snd_dma1=1 snd_dma1_size=64 snd_dma2=3
snd_dma2_size=64 snd_isapnp=1 snd_id=YMF-719
# OSS/Free setup
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm1-oss
alias sound-service-0-12 snd-pcm1-oss
And my lsmod:
snd-mixer-oss 3592 0 (autoclean)
snd-pcm1-oss 12788 1 (autoclean)
snd-card-opl3sa2 8712 1
isapnp 23169 0 [snd-card-opl3sa2]
snd-cs4231 15864 0 [snd-card-opl3sa2]
snd-mixer 25824 0 [snd-mixer-oss snd-card-opl3sa2
snd-cs4231]
snd-pcm1 16500 0 [snd-pcm1-oss snd-cs4231]
snd-opl3 1956 0 [snd-card-opl3sa2]
snd-timer 7500 0 [snd-cs4231 snd-pcm1 snd-opl3]
snd-hwdep 2484 0 [snd-card-opl3sa2 snd-opl3]
snd-pcm 8696 0 [snd-pcm1-oss snd-card-opl3sa2
snd-cs4231 snd-pcm1]
snd-mpu401-uart 1692 0 [snd-card-opl3sa2]
snd-midi 12144 0 [snd-card-opl3sa2 snd-mpu401-uart]
snd 32972 1 [snd-mixer-oss snd-pcm1-oss snd-card-opl3sa2
snd-cs4231 snd-mixer snd-pcm1 snd-opl3
snd-timer snd-hwdep snd-pcm snd-mpu401-uart
snd-midi]
soundcore 2444 4 [snd]
I'm playing now some mp3 files with 44.1kHz (using mpg123) without any problems.
I also use normal OSS drivers with such configuration:
alias char-major-14 opl3sa2
pre-install opl3sa2 modprobe "-k" "ad1848"
post-install opl3sa2 modprobe "-k" "opl3"
options opl3sa2 io=0x240 mss_io=0xe80 mpu_io=0x300 irq=10 dma=1 dma2=3
options opl3 io=0x388
And lsmod:
opl3 10476 1 (autoclean)
opl3sa2 3644 1
ad1848 15420 1 [opl3sa2]
mpu401 17964 1 [opl3sa2]
sound 55388 0 [opl3 opl3sa2 ad1848 mpu401]
soundcore 2444 7 [sound]
With this configuration I've sometimes problems (but right now it works OK
also with 44.1kHz).
Maybe your problems are not configuration-specific but hardware specific
(I don't like built-in hardware since my strange problems with Matrox G200
on mainboard)?
Good luck!
--
o------------------o ___
|Leszek Gerwatowski| _/_|_\
o------------------o (o\__/o)=)))))))))))))
"Don't fix it if it isn't broken"
