Ok Ben, here they are.
One other thing to note: During the install I had a message with "modutils"
stating
that The form:
Patch[fs]=/lib/modules/2.2.10 was replaced with the form:
Patch[fs]=/lib/modules/2.2.10/fs
I could not find where to change thi. I did find a file called
conf.modules.old that
had command lines like those described above. Could this be causing a problem
with
pam?
Doug
Ben Collins wrote:
> On Sat, Oct 23, 1999 at 12:19:48AM -0700, Doug Thistlethwaite wrote:
> > What is going on? Please help me recover my system. I currently have a
> > single login as root where I was running dselect. I am afraid to log
> > off because I don't want to be locked out permanently.
>
> Can you attach all of the files in /etc/pam.d/ aswell as your
> /etc/login.defs please? Looks to be a conffile problem, but I'm not sure
> what yet.
>
> Ben
>
> --
> Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
#
# The PAM configuration file for the Shadow `su' service
#
# Uncomment this to force users to be a member of group root
# before than can use `su'
# (Replaces the `SU_WHEEL_ONLY' option from login.defs)
# auth required pam_wheel.so
# This allows root to su without passwords (normal operation)
auth sufficient pam_rootok.so
# Uncomment and edit /etc/security/time.conf if you need to set
# time restrainst on su usage.
# (Replaces the `PORTTIME_CHECKS_ENAB' option from login.defs
# as well as /etc/porttime)
# account requisite pam_time.so
# The standard Unix authentication modules, used with
# NIS (man nsswitch) as well as normal /etc/passwd and
# /etc/shadow entries.
auth required pam_unix.so
account required pam_unix.so
session required pam_unix.so
# Sets up user limits, please uncomment and read /etc/security/limits.conf
# to enable this functionality.
# (Replaces the use of /etc/limits in old login)
# session required pam_limits.so
#
# The PAM configuration file for the Shadow `chsh' service
#
# This will not allow a user to change their shell unless
# their current one is listed in /etc/shells. This keeps
# accounts with special shells from changing them.
auth required pam_shells.so
# The standard Unix authentication modules, used with
# NIS (man nsswitch) as well as normal /etc/passwd and
# /etc/shadow entries.
auth required pam_unix.so nullok
account required pam_unix.so
session required pam_unix.so
#%PAM-1.0
auth sufficient pam_rootok.so
auth required pam_console.so
account required pam_permit.so
#
# The PAM configuration file for the Shadow `login' service
#
# NOTE: If you use a session module (such as kerberos or NIS+)
# that retains persistent credentials (like key caches, etc), you
# need to enable the `CLOSE_SESSIONS' option in /etc/login.defs
# in order for login to stay around until after logout to call
# pam_close_session() and cleanup.
#
# Outputs an issue file prior to each login prompt (Replaces the
# ISSUE_FILE option from login.defs). Uncomment for use
# auth required pam_issue.so issue=/etc/issue
# Disallows root logins except on tty's listed in /etc/securetty
# (Replaces the `CONSOLE' setting from login.defs)
auth requisite pam_securetty.so
# Disallows other than root logins when /etc/nologin exists
# (Replaces the `NOLOGINS_FILE' option from login.defs)
auth required pam_nologin.so
# This module parses /etc/environment (the standard for setting
# environ vars) and also allows you to use an extended config
# file /etc/security/pam_env.conf.
# (Replaces the `ENVIRON_FILE' setting from login.defs)
auth required pam_env.so
# Standard Un*x authentication. The "nullok" line allows passwordless
# accounts.
auth required pam_unix.so nullok
# This allows certain extra groups to be granted to a user
# based on things like time of day, tty, service, and user.
# Please uncomment and edit /etc/security/group.conf if you
# wish to use this.
# (Replaces the `CONSOLE_GROUPS' option in login.defs)
# auth optional pam_group.so
# Uncomment and edit /etc/security/time.conf if you need to set
# time restrainst on logins.
# (Replaces the `PORTTIME_CHECKS_ENAB' option from login.defs
# as well as /etc/porttime)
# account requisite pam_time.so
# Uncomment and edit /etc/security/access.conf if you need to
# set access limits.
# (Replaces /etc/login.access file)
# account required pam_access.so
# Standard Un*x account and session
account required pam_unix.so
session required pam_unix.so
# Sets up user limits, please uncomment and read /etc/security/limits.conf
# to enable this functionality.
# (Replaces the use of /etc/limits in old login)
# session required pam_limits.so
# Prints the last login info upon succesful login
# (Replaces the `LASTLOG_ENAB' option from login.defs)
session optional pam_lastlog.so
# Prints the motd upon succesful login
# (Replaces the `MOTD_FILE' option in login.defs)
session optional pam_motd.so
# Prints the status of the user's mailbox upon succesful login
# (Replaces the `MAIL_CHECK_ENAB' option from login.defs)
session optional pam_mail.so standard
# The standard Unix authentication modules, used with
# NIS (man nsswitch) as well as normal /etc/passwd and
# /etc/shadow entries. For the login service, this is
# only used when the password expires and must be changed,
# so make sure this one and the one in /etc/pam.d/passwd
# are the same.
#
# (Add `md5' after the module name to enable MD5
# passwords the same way that `MD5_CRYPT_ENAB' would
# do under login.defs)
password required pam_unix.so
# Alternate strength checking for password. Note that this
# requires the libpam-cracklib package to be installed.
# You will need to comment out the password line above and
# uncomment the next two in order to use this.
# (Replaces the `OBSCURE_CHECKS_ENAB', `CRACKLIB_DICTPATH')
#
# password required pam_cracklib.so retry=3 minlen=6 difok=3
# password required pam_unix.so use_authtok nullok md5
#
# /etc/login.defs - Configuration control definitions for the login package.
#
# $Id: login.defs.linux,v 1.11 1999/08/27 19:02:50 marekm Exp $
#
# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH.
# If unspecified, some arbitrary (and possibly incorrect) value will
# be assumed. All other items are optional - if not specified then
# the described action or option will be inhibited.
#
# Comment lines (lines beginning with "#") and blank lines are ignored.
#
# Modified for Linux. --marekm
#
# Delay in seconds before being allowed another attempt after a login failure
#
FAIL_DELAY 3
#
# Enable logging and display of /var/log/faillog login failure info.
#
FAILLOG_ENAB yes
#
# Enable display of unknown usernames when login failures are recorded.
#
LOG_UNKFAIL_ENAB no
#
# Enable logging of successful logins
#
LOG_OK_LOGINS no
#
# Enable setting of ulimit, umask, and niceness from passwd gecos field.
#
QUOTAS_ENAB yes
#
# Enable "syslog" logging of su activity - in addition to sulog file logging.
# SYSLOG_SG_ENAB does the same for newgrp and sg.
#
SYSLOG_SU_ENAB yes
SYSLOG_SG_ENAB yes
#
# If defined, all su activity is logged to this file.
#
#SULOG_FILE /var/log/sulog
#
# If defined, file which maps tty line to TERM environment parameter.
# Each line of the file is in a format something like "vt100 tty01".
#
#TTYTYPE_FILE /etc/ttytype
#
# If defined, login failures will be logged here in a utmp format.
# last, when invoked as lastb, will read /var/log/btmp, so...
#
FTMP_FILE /var/log/btmp
#
# If defined, the command name to display when running "su -". For
# example, if this is defined as "su" then a "ps" will display the
# command is "-su". If not defined, then "ps" would display the
# name of the shell actually being run, e.g. something like "-sh".
#
SU_NAME su
#
# *REQUIRED*
# Directory where mailboxes reside, _or_ name of file, relative to the
# home directory. If you _do_ define both, MAIL_DIR takes precedence.
# QMAIL_DIR is for Qmail
#
#QMAIL_DIR Maildir
MAIL_DIR /var/spool/mail
#MAIL_FILE .mail
#
# If defined, file which inhibits all the usual chatter during the login
# sequence. If a full pathname, then hushed mode will be enabled if the
# user's name or shell are found in the file. If not a full pathname, then
# hushed mode will be enabled if the file exists in the user's home directory.
#
HUSHLOGIN_FILE .hushlogin
#HUSHLOGIN_FILE /etc/hushlogins
#
# If defined, the presence of this value in an /etc/passwd "shell" field will
# disable logins for that user, although "su" will still be allowed.
#
# XXX this does not seem to be implemented yet... --marekm
# no, it was implemented but I ripped it out ;-) -- jfh
NOLOGIN_STR NOLOGIN
#
# If defined, either a TZ environment parameter spec or the
# fully-rooted pathname of a file containing such a spec.
#
#ENV_TZ TZ=CST6CDT
#ENV_TZ /etc/tzname
#
# If defined, an HZ environment parameter spec.
#
# for Linux/x86
ENV_HZ HZ=100
# For Linux/Alpha...
#ENV_HZ HZ=1024
#
# *REQUIRED* The default PATH settings, for superuser and normal users.
#
# (they are minimal, add the rest in the shell startup files)
ENV_SUPATH
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/bin/X11:/usr/local/sbin:/usr/local/bin
ENV_PATH PATH=/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games
#
# Terminal permissions
#
# TTYGROUP Login tty will be assigned this group ownership.
# TTYPERM Login tty will be set to this permission.
#
# If you have a "write" program which is "setgid" to a special group
# which owns the terminals, define TTYGROUP to the group number and
# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign
# TTYPERM to either 622 or 600.
#
TTYGROUP tty
TTYPERM 0600
#
# Login configuration initializations:
#
# ERASECHAR Terminal ERASE character ('\010' = backspace).
# KILLCHAR Terminal KILL character ('\025' = CTRL/U).
# UMASK Default "umask" value.
# ULIMIT Default "ulimit" value.
#
# The ERASECHAR and KILLCHAR are used only on System V machines.
# The ULIMIT is used only if the system supports it.
# (now it works with setrlimit too; ulimit is in 512-byte units)
#
# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
#
ERASECHAR 0177
KILLCHAR 025
UMASK 022
#ULIMIT 2097152
#
# Password aging controls:
#
# PASS_MAX_DAYS Maximum number of days a password may be used.
# PASS_MIN_DAYS Minimum number of days allowed between password changes.
# PASS_MIN_LEN Minimum acceptable password length.
# PASS_WARN_AGE Number of days warning given before a password expires.
#
PASS_MAX_DAYS 99999
PASS_MIN_DAYS 0
PASS_MIN_LEN 5
PASS_WARN_AGE 7
#
# Min/max values for automatic uid selection in useradd
#
UID_MIN 1000
UID_MAX 60000
#
# Min/max values for automatic gid selection in groupadd
#
GID_MIN 100
GID_MAX 60000
#
# Max number of login retries if password is bad
#
LOGIN_RETRIES 5
#
# Max time in seconds for login
#
LOGIN_TIMEOUT 60
#
# Number of significant characters in the password for crypt().
# Default is 8, don't change unless your crypt() is better.
# If using MD5 in your PAM configuration, set this higher.
#
PASS_MAX_LEN 8
#
# Require password before chfn/chsh can make any changes.
#
CHFN_AUTH yes
#
# Which fields may be changed by regular users using chfn - use
# any combination of letters "frwh" (full name, room number, work
# phone, home phone). If not defined, no changes are allowed.
# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
#
CHFN_RESTRICT rwh
#
# Password prompt (%s will be replaced by user name).
#
# XXX - it doesn't work correctly yet, for now leave it commented out
# to use the default which is just "Password: ".
#LOGIN_STRING "%s's Password: "
#
# Should login be allowed if we can't cd to the home directory?
# Default in no.
#
DEFAULT_HOME yes
#
# If defined, this command is run when removing a user.
# It should remove any at/cron/print jobs etc. owned by
# the user to be removed (passed as the first argument).
#
#USERDEL_CMD /usr/sbin/userdel_local
#
# If defined, either full pathname of a file containing device names or
# a ":" delimited list of device names. No password is required to log in
# as a non-root user on these devices.
#
#NO_PASSWORD_CONSOLE tty1:tty2:tty3:tty4:tty5:tty6
#
# When prompting for password without echo, getpass() can optionally
# display a random number (in the range 1 to GETPASS_ASTERISKS) of '*'
# characters for each character typed. This feature is designed to
# confuse people looking over your shoulder when you enter a password :-).
# Also, the new getpass() accepts both Backspace (8) and Delete (127)
# keys to delete previous character (to cope with different terminal
# types), Control-U to delete all characters, and beeps when there are
# no more characters to delete, or too many characters entered.
#
# Setting GETPASS_ASTERISKS to 1 results in more traditional behaviour -
# exactly one '*' displayed for each character typed.
#
# Setting GETPASS_ASTERISKS to 0 disables the '*' characters (Backspace,
# Delete, Control-U and beep continue to work as described above).
#
# Setting GETPASS_ASTERISKS to -1 reverts to the traditional getpass()
# without any new features. This is the default.
#
#GETPASS_ASTERISKS 1
#
# Enable setting of the umask group bits to be the same as owner bits
# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
# the same as gid, and username is the same as the primary group name.
#
# This also enables userdel to remove user groups if no members exist.
#
USERGROUPS_ENAB yes
#
# Instead of the real user shell, the program specified by this parameter
# will be launched, although its visible name (argv[0]) will be the shell's.
# The program may do whatever it wants (logging, additional authentification,
# banner, ...) before running the actual shell.
#
# FAKE_SHELL /bin/fakeshell
#
# Enable pam_close_session() calling. When using normal (pam_unix.so)
# session handling modules, this is not needed. However with modules
# (such as kerberos or other persistent session models), login needs
# to fork and wait for the shell to exit, so that sessions can be
# cleaned up.
#
CLOSE_SESSIONS no
################# OBSOLETED BY PAM ##############
# #
# These options are now handled by PAM. Please #
# edit the appropriate file in /etc/pam.d/ to #
# enable the equivelants of them.
#
###############
#MOTD_FILE
#DIALUPS_CHECK_ENAB
#LASTLOG_ENAB
#MAIL_CHECK_ENAB
#OBSCURE_CHECKS_ENAB
#PORTTIME_CHECKS_ENAB
#CONSOLE
#SU_WHEEL_ONLY
#CRACKLIB_DICTPATH
#PASS_CHANGE_TRIES
#PASS_ALWAYS_WARN
#MD5_CRYPT_ENAB
#CONSOLE_GROUPS
#ENVIRON_FILE
#NOLOGINS_FILE
#ISSUE_FILE
OTHER auth required pam_deny.so
OTHER account required pam_deny.so
OTHER password required pam_deny.so
OTHER session required pam_deny.so
#
# /etc/pam.d/other - specify the PAM fallback behaviour
#
# We fall back to the pam_unix modules. If this is not secure
# enough for your purpose, consider specifying pam_deny.so
# instead.
#
auth required pam_unix.so
account required pam_unix.so
password required pam_unix.so
session required pam_unix.so
#
# The PAM configuration file for the Shadow `passwd' service
#
# The standard Unix authentication modules, used with
# NIS (man nsswitch) as well as normal /etc/passwd and
# /etc/shadow entries. For the login service, this is
# only used when the password expires and must be changed,
# so make sure this one and the one in /etc/pam.d/login
# are the same. The "nullok" option allows users to change
# an empty password, else empty passwords are treated as
# locked accounts.
#
# (Add `md5' after the module name to enable MD5
# passwords the same way that `MD5_CRYPT_ENAB' would
# do under login.defs).
password required pam_unix.so nullok
# Alternate strength checking for password. Note that this
# requires the libpam-cracklib package to be installed.
# You will need to comment out the password line above and
# uncomment the next two in order to use this.
# (Replaces the `OBSCURE_CHECKS_ENAB', `CRACKLIB_DICTPATH')
#
# password required pam_cracklib.so retry=3 minlen=6 difok=3
# password required pam_unix.so use_authtok nullok md5
#
# The PAM configuration file for the Shadow `chfn' service
#
# The standard Unix authentication modules, used with
# NIS (man nsswitch) as well as normal /etc/passwd and
# /etc/shadow entries.
auth required pam_unix.so nullok
account required pam_unix.so
session required pam_unix.so
