Hello,
running kernel 2.2.12 on a new machine I found the following kernel
messages in the syslog file with decreasing time intervalls:
Oct 18 16:28:38 Winona kernel: ide0: reset: success
Oct 18 16:30:45 Winona kernel: hda: irq timeout: status=0xd0 { Busy }
Oct 18 16:30:47 Winona kernel: ide0: reset: success
Oct 18 16:33:15 Winona kernel: hda: irq timeout: status=0xd0 { Busy }
The drive occurs to be:
# hdparm -i /dev/hda
/dev/hda:
Model=IBM-DTTA-371010, FwRev=T77OA73A, SerialNo=WL0WL110
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=19590/16/63, TrkSize=0, SectSize=0, ECCbytes=34
BuffType=3(DualPortCache), BuffSize=465kB, MaxMultSect=16, MultSect=off
DblWordIO=no, maxPIO=2(fast), DMA=yes, maxDMA=2(fast)
CurCHS=1229/255/63, CurSects=19746720, LBA=yes, LBAsects=19746720
tDMA={min:120,rec:120}, DMA modes: sword0 sword1 sword2 mword0 mword1 mword2
IORDY=on/off, tPIO={min:240,w/IORDY:120}, PIO modes: mode3 mode4
the thing that bothers me is that the machine locks up for several
seconds. Appending a "ide0=noautotune" to the lilo configuration doesn't
improve the situation.
Does anybody have ideas/ suggestions?
TIA -- Peter
--
Peter Weiss
InterFace AG phone +49 (0)89 / 610 49 - 231
Leipziger Str. 16 fax +49 (0)89 / 610 49 - 85
D-82008 Unterhaching
http://www.InterFace-AG.com mailto:[EMAIL PROTECTED]
