Quoting Debian Mail ([EMAIL PROTECTED]): > > Should it? My machines running 2.0.36 are all printing on /dev/lp1 > > and that's to LPT1 and 0x378. I'm not sure why you're using 0x278 > > in the BIOS (conventionally LPT2). > > I changed it to 0x378 and said modprobe lp io=0x378
> The device is still /dev/lp0. lp1 and lp2 are still not configured, I read these words, but I don't understand what you mean by them. If you're running a 2.0.x kernel, 0x378 means minor number 1. You can only change it by editing drivers/char/lp.c which I assume you haven't. Minor number 0 goes to 0x3bc and I'm guessing you really don't want that. > and tunelp still gives the same output. So I guess it does not matter > whether 0x278 or 0x378 is used. Unfortunately. Cheers, -- Email: [EMAIL PROTECTED] Tel: +44 1908 653 739 Fax: +44 1908 655 151 Snail: David Wright, Earth Science Dept., Milton Keynes, England, MK7 6AA Disclaimer: These addresses are only for reaching me, and do not signify official stationery. Views expressed here are either my own or plagiarised.
