When i had my S3 Virge/vx, I never once got the SVGA server to work. Try the s3v server. And, I think the fb server requires kernel 2.2.x or so.
On Sun, Sep 26, 1999 at 04:53:58PM +0100, Nuno Carvalho wrote: > Hi, > > I'd an S3 Trio3D2x AGP 86C362 graphic card and was working fine on hamm > with an older XF68_FBdev X server. > > Yesterday, I upgraded my machine to slink and downloaded xserver-svga > and xserver-fbdev packages. > > Xfree86 web site says I should use SVGA X server: well i'm unable to > get it to work. When I launch SVGA X server my monitor get darked with > no chance to go back to console(just ctrl+alt+del). The output it's: > > ----cut here------ > XFree86 Version 3.3.5 / X Window System > (protocol Version 11, revision 0, vendor release 6300) > Release Date: August 23 1999 > If the server is older than 6-12 months, or if your card is > newer > than the above date, look for a newer version before reporting > problems. (see http://www.XFree86.Org/FAQ) > Operating System: Linux 2.2.10 i686 [ELF] > Configured drivers: > SVGA: server for SVGA graphics adaptors (Patchlevel 0): > NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, > RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, ET4000, ET4000W32, > ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, > ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, > ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, > wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, > sis86c202, > sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, > sis530, > sis620, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, > tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, > tgui9400cxi, > tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, > tgui9660, > tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, > cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, > cyber9397dvd, > blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, > clgd5428, > clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, > clgd5462, > clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, > clgd7541, > clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, > ncr77c22e, > cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, > mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, > ali2228, > ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, > cl6440, > video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, > s3_savage, s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, > NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, > ct65535, > ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, > ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200, > p9100, spc8110, i740, i740_pci, Voodoo Banshee, Voodoo3, generic > (using VT number 7) > > XF86Config: /usr/X11R6/lib/X11/XF86Config > (**) stands for supplied, (--) stands for probed/default values > (**) XKB: keycodes: "xfree86" > (**) XKB: types: "default" > (**) XKB: compat: "default" > (**) XKB: symbols: "en_US(pc105euro)+pt" > (**) XKB: geometry: "pc" > (**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3 > (**) Mouse: 3 button emulation (timeout: 50ms) > (**) SVGA: Graphics device ID: "My Video Card" > (**) SVGA: Monitor ID: "My Monitor" > (--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. > (--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. > (--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. > (--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. > (--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. > (--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. > (--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. > (--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. > (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. > (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. > (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. > (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. > (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. > (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. > (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. > (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. > (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/" > (--) SVGA: PCI: S3 Trio3D/2X rev 1, Memory @ 0xe0000000 > (--) SVGA: S3V: Trio3D/2X rev 1, Linear FB @ 0xe0000000 > (--) SVGA: Detected S3 Trio3D/2X > (--) SVGA: using driver for chipset "s3_virge" > (--) SVGA: videoram: 4096k > (--) SVGA: Ramdac speed: 170 MHz > (--) SVGA: Detected current MCLK value of 83.224 MHz > (--) SVGA: chipset: s3_virge > (--) SVGA: videoram: 4096k > (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 > (--) SVGA: Maximum allowed dot-clock: 170.000 MHz > (**) SVGA: Mode "640x480": mode clock = 45.800 > (**) SVGA: Mode "800x600": mode clock = 69.650 > (**) SVGA: Mode "1024x768": mode clock = 85.000 > (**) SVGA: Mode "1280x1024": mode clock = 110.000 > (--) SVGA: Virtual resolution set to 1280x1024 > (--) SVGA: SpeedUp code selection modified because virtualX != 1024 > (--) SVGA: s3_virge: Using hardware cursor > S3VGEReset called from s3v_accel.c line 349 > restarting S3 graphics engine reset 1 ... > restarting S3 graphics engine reset 2 .restarting S3 graphics engine > reset 9 ... > S3VGEReset called from s3v_accel.c line 379 > restarting S3 graphics engine reset 1 ... > restarting S3 graphics engine reset 2 ... > restarting S3 graphics engine reset 3 ... > restarting S3 graphics engine reset 4 ... > restarting S3 graphics engine reset 5 ... > restarting S3 graphics engine reset 6 ... > restarting S3 graphics engine reset 7 ... > restarting S3 graphics engine reset 8 ... > restarting S3 graphics engine reset 9 ... > restarting S3 graphics engine reset 1 ... > S3VGEReset called from s3v_accel.c line 379 > restarting S3 graphics engine reset 1 ... > restarting S3 graphics engine reset 2 ... > restarting S3 graphics engine reset 3 ... > restarting S3 graphics engine reset 4 ... > restarting S3 graphics engine reset 5 ... > restarting S3 graphics engine reset 6 ... > restarting S3 graphics engine reset 7 ... > restarting S3 graphics engine reset 8 ... > restarting S3 graphics engine reset 9 ... > restarting S3 graphics engine reset 2 ... > S3VGEReset called from s3v_accel.c line 379 > restarting S3 graphics engine reset 1 ... > ---cut here---- > > Probably this continue ... i don't see that on screen! > Is this some AGP problem ? > > When trying to get XF86_FBDev to work it results on: > > ---cut here---- > XFree86 Version 3.3.5 / X Window System > (protocol Version 11, revision 0, vendor release 6300) > Release Date: August 23 1999 > If the server is older than 6-12 months, or if your card is > newer > than the above date, look for a newer version before reporting > problems. (see http://www.XFree86.Org/FAQ) > Operating System: Linux 2.2.10 i686 [ELF] > Configured drivers: > FBDev: Server for frame buffer device > (Patchlevel 11): mfb, cfb8, cfb16, cfb24, cfb32 > (using VT number 7) > > XF86Config: /usr/X11R6/lib/X11/XF86Config > (**) stands for supplied, (--) stands for probed/default values > (**) XKB: keycodes: "xfree86" > (**) XKB: types: "default" > (**) XKB: compat: "default" > (**) XKB: symbols: "en_US(pc105euro)+pt" > (**) XKB: geometry: "pc" > (**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3 > (**) Mouse: 3 button emulation (timeout: 50ms) > (**) FBDev: Graphics device ID: "Generic VGA" > (**) FBDev: Monitor ID: "My Monitor" > (--) FBDev: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. > (--) FBDev: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. > (--) FBDev: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. > (--) FBDev: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. > (--) FBDev: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. > (--) FBDev: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. > (--) FBDev: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. > (--) FBDev: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. > (--) FBDev: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. > (--) FBDev: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. > (--) FBDev: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. > (--) FBDev: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. > (--) FBDev: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. > (--) FBDev: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. > (--) FBDev: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. > (--) FBDev: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. > (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/" > (**) FBDev: Using default frame buffer video mode > > Fatal server error: > fbdevScreenInit: unable to set screen params (Invalid argument) > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages > ------cut here------ > > Section "Screen" on XF86Config it's just like on Documentation. > My console it's with 1024x768x{16, I think} > > What should I do ? > > I think I've more chances on XF86_FBDev meanwhile I don't know what to > do. > > Thanks for your help. > > Regards, > Nuno Carvalho > > ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ > Nuno Emanuel F. Carvalho > Dep. Informatics Engineering > University of Coimbra > > PGP key available at finger > ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ > > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null -- Seth Arnold | http://www.willamette.edu/~sarnold/ Hate spam? See http://maps.vix.com/rbl/ for help Hi! I'm a .signature virus! Copy me into your ~/.signature to help me spread!
