Hi all, I installed a scsi card a week ago that I was told was a ADAPTEC 2904 card. Well I couldn't get it to work and finally! *blush* checked the small paper inside the plastic bag it came with and It is really an ACARD AEC-6710S
Ok I think and recompile (2.3.16) and adds acard lower level drive support. Reboots and get the following message. (I have a HP 6200C scanner hooked to it) aec6710x_detect: ACARD AEC-671X PCI Ultra/W SCSI-3 Host Adapter: 0 IO:e400 IRQ:11. ID: 0 HP C2270A 3828 ID: 7 Host Adapter scsi0: ACARD AEC-6710/6712 PCI Ultra/W SCSI-3 Adapter Driver V1.0 scsi1: scsi host adapter emulation for IDE ATAPI devices scsi: 2 hosts. -snip- SCSI bus is being reset for host0 channel 0. ... Now the booting hangs. So can any scsi gurus help me here or should I just return the card and try with another card (maybe an Adaptec that I had first in mind) ? Or can I get this to work ? Any help/advice would be much appreciated. Best Regards Joakim Svensson
