I have a BIG problem vith the 3.3.4 version of the 3dlabs xserver: it dont
recognize my Elsa Gloria XL video card
Obviously, with the 3.3.3.1 version of the xserver all works fine.
Distribution: Debian potato
Kernel: 2.2.11
here the output of my /proc/pci(only video section), 3.3.3.1 and 3.3.4
version of the xserver.
-----------------
PCI devices found:
....
Bus 0, device 13, function 0:
VGA compatible controller: Unknown vendor Unknown device (rev 22).
Vendor id=1048. Device id=8901.
Medium devsel. IRQ 16.
Non-prefetchable 32 bit memory at 0xec000000 [0xec000000].
Bus 0, device 13, function 1:
Co-processor: 3Dlabs GLINT Delta (rev 1).
Medium devsel. Fast back-to-back capable. IRQ 16. Master Capable.
Latency=64. Min Gnt=192.
Non-prefetchable 32 bit memory at 0xf6100000 [0xf6100000].
Bus 0, device 13, function 2:
Display controller: 3Dlabs GLINT MX (rev 1).
Medium devsel. Fast back-to-back capable. IRQ 16. Master Capable.
Latency=64.
Non-prefetchable 32 bit memory at 0xf6120000 [0xf6120000].
Non-prefetchable 32 bit memory at 0xf4000000 [0xf4000000].
Non-prefetchable 32 bit memory at 0xf2000000 [0xf2000000].
Non-prefetchable 32 bit memory at 0xf0000000 [0xf0000000].
------------------------------
XFree86 Version 3.3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: December 29 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i586 [ELF]
Configured drivers:
GLINT: accelerated server for 3DLabs GLINT graphics adapters
(Patchlevel 0)
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) XKB: rules: "xfree86"
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) GLINT: Graphics device ID: "ELSA GLoria-XL"
(**) GLINT: Monitor ID: "My Monitor"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) GLINT: found GLINT Delta at card #13 func #1 with base 0xf0020000
(--) GLINT: found GLINT MX at card #13 func #2 with base 0xf6120000
(--) GLINT: Localbuffer address at 0xf4000000
(--) GLINT: Framebuffer address at 0xf2000000
(**) GLINT: videoram : 16384k
(--) GLINT: localbuffer ram : 32768k
(--) GLINT: Detected IBM 640 Ramdac
(--) GLINT: Maximum allowed dot-clock: 220.000 MHz
(**) GLINT: Mode "1280x1024": mode clock = 157.500
(--) GLINT: 3Dlabs TX/MX only supports one modeline.
(--) GLINT: Using XAA (XFree86 Acceleration Architecture)
(--) GLINT: XAA: Solid filled rectangles
(--) GLINT: XAA: Screen-to-screen copy
(--) GLINT: XAA: Using 10 128x128 areas for pixmap caching
(--) GLINT: XAA: Caching tiles and non-transparent stipples
(--) GLINT: XAA: Horizontal and vertical lines and segments
---------------------------------------------
XFree86 Version 3.3.4 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 13 1999
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.10 i686 [ELF]
Configured drivers:
GLINT: accelerated server for 3DLabs GLINT graphics adapters
(Patchlevel 0)
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) XKB: rules: "xfree86"
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) GLINT: Graphics device ID: "ELSA GLoria-XL"
(**) GLINT: Monitor ID: "My Monitor"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
Fatal server error:
No GLINT/PERMEDIA based card found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
X connection to :0.0 broken (explicit kill or server shutdown).
--------------------------------------------------------
Any idea?
Biko
