Hi:
Currently, I'm running linux well on my first
IDE HD, but the problem comes when I try to use
lilo booting the second IDE HD. Please give me
some advices. Thanks :) Oh, by teh way, the first
IDE HD (/dev/hda) is the master drive on first
IDE controller. The second IDE HD (/dev/hdd) is
the slave drive on second IDE controller.
I've tried to modify /etc/lilo.conf to boot
the DOS on /dev/hdd3, but it fails. The error
message appearing at the booting time is the
following:
boot: DOS
LOADING DOS
ERROR: 0x01
LOADING Linux
The following is my /etc/lilo.conf :
boot=/dev/hda1
install=/boot/boot.b
map=/boot/map
linear
prompt
timeout=100
image=/vmlinuz
label=Linux
root=/dev/hda1
read-only
vga=normal
other=/dev/hdd3
loader=/boot/chain.b
label=DOS
table=/dev/hdd
The following is my partition table of the
second IDE HD:
/dev/hdd1 1 1088 514048+ 83 Linux native
/dev/hdd2 1089 1229 66622+ 82 Linux swap
/dev/hdd3 * 1025 4050 1429785 e Win95 FAT16 (LBA)
/dev/hdd4 4051 10602 3095820 f Win95 Extended (LBA)
/dev/hdd5 4051 6239 1034271 c Win95 FAT32 (LBA)
/dev/hdd6 6240 8428 1034271 c Win95 FAT32 (LBA)
/dev/hdd7 8429 10600 1026238+ 83 Linux native
Thanks so much for help :)
Jack
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
