Hi, On Wed, 25 Aug, 1999 à 02:16:46AM -0500, Geocrawler.com wrote: > This message was sent from Geocrawler.com by "Joakim Svensson" <[EMAIL > PROTECTED]> > Be sure to reply to that address. > > Hi all, [...] > I am wondering if anyone could give me some > ideas if something is wrong with my CDRW setup. > > Below are some output from booting: > > Linux version 2.2.10 (...snip...) > (..snip..) > hda: IBM-DTTA-371010 , ATA DISK drive > hdc: CD-ROM CDU4011 , ATAPI CDROM drive > hdd: Hewlett-Packard CD-Writer Plus 8100, ATAPI CDROM drive > (...snip...) > scsi0 : SCSI host adapter emulation for IDE ATAPI devices > scsi : 1 host. > Vendor: CD-ROM Model: CD-ROM CDU4011 Rev: UY04 > Type: CD_ROM ANSI SCSI revision: 02 > Vendor: CD-ROM Model: CD-ROM CDU4011 Rev: UY04 > Type: CD_ROM ANSI SCSI revision: 02 > Vendor: CD-ROM Model: CD-ROM CDU4011 Rev: UY04 > Type: CD_ROM ANSI SCSI revision: 02 > Vendor: CD-ROM Model: CD-ROM CDU4011 Rev: UY04 > Type: CD_ROM ANSI SCSI revision: 02 > Vendor: CD-ROM Model: CD-ROM CDU4011 Rev: UY04 > Type: CD_ROM ANSI SCSI revision: 02 > Vendor: CD-ROM Model: CD-ROM CDU4011 Rev: UY04 > Type: CD_ROM ANSI SCSI revision: 02 > CD-ROM Model: CD-ROM CDU4011 Rev: UY04 > Type: CD_ROM ANSI SCSI revision: 02 > Vendor: HP Model: CD-Writer+ 8100 Rev:1.0g > Type: CD-ROM ANSI SCSI revision: 02 > scsi0: channel 0 target 1 lun 1 request sense failed, performing reset. > SCSI bus is being reset for host 0 channel 0. > scsi: detected total. > (...snip...) >
I think that you've enable the option to probe all SCSI LUN. It's only useful for multi-cd readers. Your CD reader will appears only one time and you won't have the error : "scsi0: channel 0 target 1 lun 1 request sense failed,". I hope that this solve your problem. -- ( >- Laurent PICOULEAU -< ) /~\ [EMAIL PROTECTED] /~\ | \) Linux : mettez un pingouin dans votre ordinateur ! (/ | \_|_ Seuls ceux qui ne l'utilisent pas en disent du mal. _|_/
