I'm trying to add a second Intel EtherExpress Pro/10+ ISA NIC card to a system and have had no luck so far. I've read the Ethernet HOWTO and Multiple Ethernet Card Mini-HOWTO but the advice in there hasn't helped so far.
First I installed the second NIC and configured it using 'softset2' to NOT PnP with irq = 11, io = 0x320. I've compiled EtherExpress Pro/10+ support into the kernel (v. 2.2.10) as a module. I added the following to /etc/modutils/aliases: alias eth0 eepro alias eth1 eepro I added the following to /etc/modutils/modconf (this technique is from the Mini-HOWTO): options eepro io=0x300,0x320 When I boot the system, however, there is an error that says (approximately): /lib/modules/2.2.10/net/eepro.o too many options for io. I've tried looking at eepro.c to see where this error might be coming from but these strings aren't in that file. I've also searched the net to see if there is some other hint somewhere. While I keep working on this, I wonder if anyone here has run into this situation before? Thanks... ---------------------------------------------------------------------- Steve Witt Raytheon Systems Company Network Technology and Systems Group 1901 West Malvern Ave (714) 732-0161 Fullerton, CA 92834
