Ok here is my basic layout of my system Cyrix 200 48 megs of ram TX Pro Motherboard 3.5" Floppy drive Primary Master hd 120 meg Conner Secondary Master hd 81 meg NE 2000 PCI Network card Some PCI Video card
Yeah, I know the hds are kinda small...anywayz. I put in the rescue/installation disk and press enter at the prompt. It Gives me the following Text on the stall: Memory: 45644k/49152k available (1136 kernel code, 384k reserved, 1300k data) This processor honours the WP bit even when in supervisor mode. Good. Swansea University Computer Society NET3.035 for linux 2.0 NET3: Unix domain sockets 0.13 for Linux NET3.035 Swansea University Computer Society TCP/IP for NET3.034 IP Protocols: IGMP, ICMP, UDP, TCP VFS: Diskquotas version dquot_5.6.0 initialized Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. Checking 'hlt' instruction... Ok. Linux version 2.0.35 ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #2 Sun Feb 21 15:55:27 EST 1999 Starting kswapd v 1.4.2.2 Real Time Clock Driver v1.09 tpqic02: Runtime config, $Revision: 0.4.1.5 $, $Date: 1994/10/29 02:46:13 $ tpqic02: DMA buffers: 20 blocks, at address 0x282600 (0x28254c) Ramdisk driver initialized : 16 ramdisks of 4096K size loop: registered device at major 7 hda: Conner Peripherals 120MB - CP3H104, 116MB w/32kB Cache, CHS=762/8/39 hdc: WDC AC280S, 81MB w/7kB Cache, CHS=980/10/17 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 Floppy drives(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8 _ [ blinking cursor ] Then it does nothing. No disk activity and no response to keyboard. I have tried rebooting about 3 times. Redownloading the image. Using a different diskette and using the safe rescue image, but with no avail. Does anybody know what I should do to be able to finish installing? Thanks, Jeff p.s. Yes, I typed that all out. Fortunately I have another computer beside it.
