Julian, I just installed a Diamond Supra Express in a slink box this evening.
The first thing I did was disable PNP and set the com port and irq via the jumpers (see Appendix A of the Supra Express "Getting Started Manual"). I was lucky that I knew the com port and irq settings of the old modem; com2 (/dev/ttyS1) and irq3. Then it was out with the old and in with the new. Pon worked the same as ever. HTH, --David On Tue, Jul 20, 1999 at 02:03:51AM +0100, Julian Gilbey wrote: > [Please Cc: me in replies.] > > I have just tried setting up a Debian system for someone, and have > been unable to get his modem to work. The details are: > > - fresh slink (Debian 2.1) installation from the official CDs on a > Pentium. > - Windows reports the modem to be a SupraExpress 56i Sp Intl > - I configured the PPP details using pppconfig with no special > options or anything similar > - the /var/log/ppp.log file showed that the intial connection had > been attempted, and that after precisely 45 seconds, an alarm > happened and the connection attempt failed. Nothing happened > between the "expect OK" and the alarm lines in the log. > > Does anyone have any idea what to do or how to go about fixing this > problem? > > Thanks in advance, > > Julian -- =============================== David Karlin mailto:[EMAIL PROTECTED] http://funk48.home.travelin.com Powered by Debian GNU/Linux 2.1 ===============================
