On Thu, Jul 08, 1999 at 09:38:39PM -0400, Bob C. Ruddy wrote: > Hello,
Hi > I've got a problem getting my xircom Ethernet+Modem multifunction card > working right. The first problem is that I can't get the card manager to > automatically load the modules for the card. The second problem is that > even when I do modprobe the module. When I run ifconfig it tells me that > the device doesn't exist. The strange thing is that about one out of ten > times though it does actually work. I've retraced my steps on the few > times I've gotten it to work but have not been able to reproduce the > results of it working. I'm running kernel 2.2.10 if any one has experience > with this card please let me know. It is the one without the doggles on > it. Thanks again for your help. I have a Xircom PCMCIA 100/10 MBit + 56 Modem card too. But I think (because PCMCIA is not included with the kernel) you are missing the pcmcia modules. Aspecially when you are using 2.2.* now, I would advice you to get the newest pcmcia-cs tarball at: http://hyper.stanford.edu/~dhinds/pcmcia/ftp/ compile it and install! Paul ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Student @ | Using the Power of Linux... Eindhoven University of | ICQ: 8678828 Technology, The Netherlands | email: [EMAIL PROTECTED]
