Quoting Isabelle Poueriet ([EMAIL PROTECTED]): > Hello everyone. I'm sorry to post this again, but I'm having new problem > now. > > I made some changes to those files I sent before and now when I type pppd > at the command prompt I get some garbage text on my screen, and after a > little while(30 seconds or so) I get the prompt back. > > I tailed d my /var/log/messages file and it reads as follows: > > pppd started by root..... > using interface ppp0 > connect : ppp0 <---> /dev/tty1 > Lcp: time out sending config-Request > Receive serial link is not 8-bit clean > Problem: all had bit 7 set to 0 > Exit > > Any suggestions? I tried minicom -h but minicom is not in my system. > I only have the base system installed. It's Debian 2.1 (Slink). > I also tried wvdial. Not installed either. > > I'm eager to get Debian going. Please help. > Thanks a million in advance. > > The files I have are as follows:
[snip] Try setting the ppp modem speed to 38400, as setserial initializes the serial ports to 38400. -- Andreas Persenius [EMAIL PROTECTED]
