How can I tell how my USB devices are indentified in Linux? I want to be able to mount my Sandisk USB mass storage device to get pictures off my camera's CF card. I know through trial and error that my Zip 250 USB drive is seen as /dev/sda1 so I created a mnt/sda1 to access it. I have several devices connected via USB including printer, mouse and scanner in addition to the devices mentioned. Here is the applicable portion of dmesg:
usb.c: registered new driver usblp printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x043D pid 0x001D printer.c: v0.11: USB Printer Device Class driver usb.c: registered new driver usbscanner scanner.c: 0.4.6:USB Scanner Driver Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage usb-uhci.c: interrupt, status 2, frame# 1804 usb_control/bulk_msg: timeout scsi1 : SCSI emulation for USB Mass Storage devices Vendor: SanDisk Model: ImageMate II Rev: 1.30 Type: Direct-Access ANSI SCSI revision: 02 WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 7 usb_control/bulk_msg: timeout scsi2 : SCSI emulation for USB Mass Storage devices Vendor: IOMEGA Model: ZIP 250 Rev: 32.G Type: Direct-Access ANSI SCSI revision: 02 WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 5 USB Mass Storage support registered. [drm] AGP 0.99 on Intel 440BX @ 0xe4000000 64MB [drm] Initialized r128 2.1.6 20010405 on minor 0 Additionnally, what should be changed in fstab?:# /etc/fstab: static file system information. # # <device> <mount point> <type> <options> <dump> <pass> /dev/hde5 / reiserfs defaults 0 1 /dev/hde8 /home reiserfs defaults 0 2 /dev/hde7 /usr reiserfs defaults 0 2 /dev/hde1 /windows vfat defaults,gid=windows,unmask=002 0 0 /dev/hde6 none swap sw 0 0 proc /proc proc defaults 0 0 /dev/fd0 /floppy auto defaults,user,noauto 0 0 /dev/scd1 /cdrom iso9660 defaults,user,noauto,ro 0 0 /dev/scd0 /cdrom1 iso9660 defaults,user,noauto,ro 0 0 /dev/4 /zip auto adminmenu,defaults,user,noauto 0 0 /dev/sda4 /zip2 auto adminmenu,defaults,user,noauto 0 0 Thanks for assistance. -Trey -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
