Hey. After switching from 2.0.36 to 2.2.5 I've lost the lp support working. Copying into /dev/lp0 causes deadlock of executing process. Here are some config infos: ******************************************* #dmesg <snip> parport0: PC-style at 0x378, irq 7, dma 3 [SPP,PS2] lp0: using parport0 (interrupt-driven). <snip> ******************************************* When the printer is on during boot, there is one additional line: ******************************************* #dmesg <snip> parport0: PC-style at 0x378, irq 7, dma 3 [SPP,PS2] lp0: using parport0 (interrupt-driven). <snip> lp0 off-line ******************************************* Here are some /proc files contents: ******************************************* /proc/parport/0/hardware base: 0x378 irq: 7 dma: 3 modes: SPP,PS2
/proc/parport/0/devices lp /proc/ioports <snip> 0378-037a : parport0 <snip> ******************************************* Note that under 2.0.36 printer is working (as /dev/lp1 of course). All settings are coherent with BIOS. What's going on? TIA Jaros
