Wayne Topa hat gesagt: // Wayne Topa wrote:
> In reply to:Frank Barknecht
>
> Have you changed /etc/printcap entries to reflect the change from
> lp1, as used in the 2.0.34 Kernel, to the lp0 used in the 2.2.x
> kernels?
Yes.
>
> Quoting Frank Barknecht([EMAIL PROTECTED]):
> >
> > Hi all,
> >
> > I upgraded from kernel 2.0.34 to kernel 2.2.4 which came on my
> > Debian-CDs. Now printing has stopped. I compiled lp and parport
> > as modules, changed the printcap to point to /dev/lp0 instead of
> > lp1.
> > [...]
> > I did not change the formerly working lpd setup in other places except
> > the lp-device number:
> >
> > # printcap
> > lp|nec|nec|Nec Silentwri:\
> > :lp=/dev/lp0:sd=/var/spool/lpd/nec:\
> > :sh:pw#80:pl#66:px#1440:mx#0:\
> > :if=/usr/sbin/psonly300-filter:\
> > :af=/var/log/lp-acct:lf=/var/log/lp-errs:
> >
--
__ __
Frank Barknecht ____ ______ ____ __ trip\ \ / /wire ______
/ __// __ /__/ __// // __ \ \/ / __ \\ ___\
/ / / ____/ / / / // ____// /\ \\ ___\\____ \
/_/ /_____/ /_/ /_//_____// / \ \\_____\\_____\
/_/ \_\
