Having just gotten an SB16 to work yep. Irq 7 io 220 dma 1 dma 5 There are also io's for 320? and 388. (I think, I had to change mine around alot, so I might be wrong with these two).
I had to recomple the module using the values I needed before the card would work. And activate the thing using isapnp with the same values. What a pain. --Dano > -----Original Message----- > From: Richard E. Hawkins Esq. [SMTP:[EMAIL PROTECTED] > Sent: Wednesday, April 28, 1999 8:58 AM > To: Allan M. Wind > Subject: Re: lost sound after changing video card > > Allen added, > > > > On 1999-04-27 16:23, Richard E. Hawkins Esq. wrote: > > > > The only obviuos thing that I think think of is IRQ, DMA or IO > > conflict which would prevent the (sound) driver to prosper. The > > device busy is normal though - at least, I've seen that with working > > cards as well. > > > eyryttyp0:hawk>cat /proc/ioports > 0000-001f : dma1 > 0020-003f : pic1 > 0040-005f : timer > 0060-006f : keyboard > 0080-008f : dma page reg > 00a0-00bf : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 01f0-01f7 : ide0 > 02f8-02ff : serial(set) > 0300-031f : NE2000 > 03c0-03df : vga+ > 03f6-03f6 : ide0 > 03f8-03ff : serial(set) > 6300-6307 : ide0 > 6308-630f : ide1 > eyryttyp0:linux>cat /proc/interrupts > CPU0 > 0: 6147164 XT-PIC timer > 1: 39264 XT-PIC keyboard > 2: 0 XT-PIC cascade > 4: 282277 XT-PIC serial > 10: 809859 XT-PIC NE2000 > 13: 1 XT-PIC fpu > 14: 98993 XT-PIC ide0 > NMI: 0 > > But now i notice that there seems to be no entry in /etc/modutils to > configure the sound module, and I need these because the defaults for > the sb module are for an uncommon irq. I had to put these in befroe to > get it to work, I wonder where they went. And does anywone know what > they are offhand for a 16bit soundblaster clone? (I can't remember what > I did with them). > > No, wait; that's not right. I know what I did with them, they just > seem to have left :) > > > > -- > > > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < > /dev/null
