Hello !
I have problems with the card mentioned above. The driver for SMC
etherpower II cards (epic100) does not work. Please someone
tell me if there is a LINUX driver for it or not. I took a look at the
web page
http://www.smc.com/ftpdocs/nics.html#nics/latest
and I think that this chipset is a brand new one.
Here is some information about the state of the system.
dmesg|grep eth0
eth0: SMC EPIC/100 (chip ID 0005) at 0x1000, IRQ 11, 00:e0:29:30:d6:e4.
eth0: MII transceiver #3 control 3000 status 7809.
eth0: Autonegotiation advertising 01e1 link partner 0001.
ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
Collisions:0
eth0 Link encap:Ethernet HWaddr 00:E0:29:30:D6:E4
inet addr:152.66.73.171 Bcast:152.66.73.191
Mask:255.255.255.224
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
Collisions:0
Interrupt:11 Base address:0x1000
route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref
Use Iface
152.66.73.160 0.0.0.0 255.255.255.224 U 0 0
1 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U
0 0 0 lo
0.0.0.0 152.66.73.161 0.0.0.0 UG 1
0 2eth0
uname -a
Linux tateyama3 2.0.36 #2 Sun Feb 21 15:55:27 EST 1999 i686 unknown
I would appreciate any help.
Thanks!
Robert
