Hi csani, You're a genius!.... the ipfwadm -Mf command was rejected, but the others worked and now I'm back on the net! Can you please explain a little what was going on and why my config defaulted to allow_no_network_traffic_mode?
What's the best way to permanently set the correct options? Many thanks, Chris. On 6 Apr 99 at 16:35, Holanyi Janos, jr. wrote: > Just wondering... try these commands: > (for a 2.0 kernel) > > ipfwadm -If > ipfwadm -Of > ipfwadm -Ff > ipfwadm -Mf > ipfwadm -I -p acc > ipfwadm -O -p acc > ipfwadm -F -p acc > ipfwadm -F -p acc > > ...and ping. Is it better? > > Bye > csani > > On Tue, 6 Apr 1999, Chris Brown wrote: > > > Brant & others..... getting desperate here, please help! > > > > To answer your question, I'm not sure *EXACTLY* how to check if the > > PCMCIA packages are installed, but I believe the answer is yes. > > > > If I look at top, I can see cardmgr running. If I insert/remove the > > 3c589 I hear the tell-tale hot-swap beeps, and when the system boots > > or the card is inserted, the network active light comes on on the > > adapter at the appropiate times. > > > > Also, a ping of the machine's own address completes properly in a > > millisecond or two. If I remove the card, pinging its own address > > returns the message "network is unreachable". Pings to any other > > address with the card in result in: > > ping: sendto: operation not permitted > > ping: wrote 207...... 64 chars, ret=-1 > > > > > > I had a linux_guru_friend stop by last night to look at the problem, > > he looked at some low level tcpip functionality and saw that arp > > requests were being received by the laptop, but is wasn't sending > > anything out on the network. After mucking with it for a few hours he > > thought he would try a re-install from the rescue disks..... same > > result! We successfully installed debian via nfs over the *EXACT* > > same network and interface, then on rebooting the network doesn't > > work and ping returns "operation not allowed" > > > > Any suggestions please !!!!!! > > > > On 5 Apr 99 at 22:42, Brant Wells wrote: > > > > > > Have you checked to make sure that the latptop PCMCIA packages are > > > installed? > > > > > > Just checking, > > > > > > Brant. > > > > > > Chris Brown wrote: > > > > > > > Please help, this is a newbie being stupid question.... > > > > > > > > I've done several slink installs that have worked fine. > > > > > > > > I'm trying to install it on my laptop now and am having problems > > > > with the system once its installed. Basically everything seems > > > > fine but I can't use the network (3c589 pcmcia ethernet). I can ping > > > > the machine's own address but pings anywhere else result with ping > > > > declaring "not allowed"... > > > > > > > > My ifconfig and route table look fine. I know the driver and network > > > > is okay because the entire system was nfs installed initially! This > > > > problem occurs when I reboot after completing the entire install > > > > process. > > > > > > > > I suspect that I've (unknowingly) installed some sort of ip security > > > > program that is not allowing network access, I see things in the boot > > > > log like "ip paranoia deamon"... and others that I don't understand. I > > > > used the custom package selection of dinstall. I've carefully done > > > > the process twice with the same results. > > > > > > > > As a newbie, I have no idea how to search the OS to find the > > > > offending software if that's the problem. > > > > > > > > Besides any suggestions on what might be causing this problem, can > > > > someone please let me know how I'd (efficiently) go about tracking > > > > down offending software in general? > > ********************************************************************* Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!! Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org ****************************************************************
