Hello all,
I have been trying to burn a particular image to CD for the last 4
hours now. In the process, I have killed 5 CD's from the same bundle.
cdrecord gets about 25-30% done with the burn, and then it gives output
like this:
Waiting for reader process to fill input-buffer ... input-buffer ready.
Starting new track at sector: 0
cdrecord: Success. write_g1: scsi sendcmd: retryable error
CDB: 2A 00 00 02 2B D0 00 00 10 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 03 00 00 00 00 0A 00 03 A4 DE 02 FF 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x02 Qual 0xFF (no seek complete) [No matching qualifier] Fru
0x0
Sense flags: Blk 0 (valid)
cmd finished after 6.077s timeout 40s
write track data: error after 291405824 bytes
Sense Bytes: F0 00 00 00 00 00 00 0A 00 03 A9 8D 00 00 00 00 00 00
Writing time: 969.163s
Fixating...
cdrecord: Success. close track/session: scsi sendcmd: retryable error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 05 00 00 00 00 0A 00 03 A9 95 2C 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (valid)
cmd finished after 0.008s timeout 480s
Fixating time: 0.009s
cdrecord: fifo had 9021 puts and 8894 gets.
cdrecord: fifo was 0 times empty and 8789 times full, min fill was 70%.
...
I doubt that the drive is damaged, because I wrote a CD earlier today and
it worked perfectly. I also doubt that it is the fault of Linux, because
when I tried to burn the same CD from Windows, it hung after getting
through about 30% of the burn. The CD-RW is a Memorex CRW-1622 using
IDE-SCSI on Kernel 2.2.2. Any ideas, or do I have a bad batch of CD's
here?
Thanks,
Steve
