>I've got a set of unofficial install-disk images, which have a newer >version of the aic7xxx driver. You can find them at >http://www.debian.org/~adric/aic7xxx/. Several people have reported
i'd had got the same problem and those drivers didn`t work. Mayne you could be luckier than me, but if they don't work check your hardware deeply and look for addresses and IRQs conficts. I solve my problem changing the motherboard. Noe those drivers that didn't work runs perfectly. >using them successfully, though they were generally needing to boot off >a SCSI drive. > >On Fri, Feb 12, 1999 at 07:12:49PM -0600, Avi Schwartz wrote: >> Hi, >> >> I am trying a completely new installation of Debian 2.0 on a machine >> which boots from an IDE adapter and also has an Adaptec 2940UW >> controller. I am booting from the CDROM and the installation goes into >> an infinite loop on the following lines: >> >> SCSI bus is being reset for host 0 channel 0 >> SCSI host 0 abort (pid 0) timed out - resetting >> SCSI bus is being reset for host 0 channel 0 >> SCSI host 0 channel 0 reset (pid 0) timed out - trying harder >> >> This group of messages repeats forever... >> >> I also downloaded the latest unstable version of the recovery disk but >> this one just hangs right before these messages. >> >> How can I continue the installation? For the time being I can live >> without the SCSI controller, but the installation program doesn't seem >> to have an option to skip the SCSI probe (and no, I wouldn't want to >> pull out the card since other OSs are using it just fine). >> >> Any suggestions on how to proceed? > > Good luck and if you solve your problem I'd like to know how do you fit it. (sorry for this rubbish english). __ Even God dicusses the details with the devil (anonymous) Antonio A. Rivas [EMAIL PROTECTED] STARTEG Project [EMAIL PROTECTED] __ >-- >Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > >
BEGIN:VCARD VERSION:2.1 N:Rivas Ojanguren;Antonio;Alfredo FN:Antonio Alfredo Rivas Ojanguren TEL;HOME;VOICE:985781204 TEL;HOME;FAX:985781204 ADR;HOME:;;La Navaliega, 3;San Claudio;Principado de Asturias;33191;España (SPAIN) LABEL;HOME;ENCODING=QUOTED-PRINTABLE:La Navaliega, 3=0D=0ASan Claudio, Principado de Asturias 33191=0D=0AEspa=F1a= (SPAIN) EMAIL;PREF;INTERNET:[EMAIL PROTECTED] REV:19990212T015042Z END:VCARD
