I'm working to get X11R6 on my Compaq Contura 410 (486DX2-50, 20MB, 2GB,
external monitor) working. Last time i had still a problem with the
trackball, -just forgot insmod psaux- it is resolved now.
But the server starts, shows the background and mousepointer and shuts
down. I get following messages:
/usr/bin/X11/startx: gpm: command not found
(This command is from me to shut down gpm)
XFree86 Version 3.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: Jun 2 1997
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.21 i486 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, et3000, pvga1,
wd90c00,
wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201,
sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b,
tvga8900c,
tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b,
tvga9200cxr,
tgui9320lcd, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
tgui9440agi, tgui96xx, cyber938x, clgd5420, clgd5422, clgd5424,
clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436,
clgd5446,
clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215,
clgd6225,
clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555,
ncr77c22,
ncr77c22e, cpq_avga, mga2064w, mga1064sg, oti067, oti077, oti087,
oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401,
cl6410,
cl6412, cl6420, cl6440, video7, ct65520, ct65525, ct65530,
ct65535,
ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct64200,
ct64300, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
AP6422, AT24, s3_virge, generic
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "de"
(**) Mouse: type: PS/2, device: /dev/psaux, baudrate: 1200
(**) SVGA: Graphics device ID: "Primary Card"
(**) SVGA: Monitor ID: "Primary Monitor"
(--) SVGA: Mode "320x240" needs hsync freq of 62.95 kHz. Deleted.
Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/X11R6/lib/X11/fonts/Type1" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/X11R6/lib/X11/fonts/Speedo" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi"
(--) SVGA: WD: Signature for WD90C[23]X=[0x32 0x34]
(--) SVGA: WD: Detected 90C24. Try 90C30 or 90C31 if this doesn't work.
!!! I did, no success. !!!
(--) SVGA: WD: FP_Lock = 0xa6:
(--) SVGA: WD: dual scan 90C24, external monitor: assuming 1 Meg VRAM
(--) SVGA: chipset: wd90c24
(--) SVGA: videoram: 1024k
(**) SVGA: clocks: 25.18 28.32 65.02 36.00 29.98 77.43 62.21
80.11
(**) SVGA: clocks: 31.50 35.50 75.19 50.12 39.83 50.12 42.06
44.30
(**) SVGA: clocks: 39.83
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 90.000 MHz
(**) SVGA: Mode "640x480": mode clock = 25.180, clock used = 25.180
(--) SVGA: There is no mode definition named "320x240"
(--) SVGA: Removing mode "320x240" from list of valid modes.
(--) SVGA: Virtual resolution set to 640x480
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: PVGA1: SpeedUps selected (Flags=0xf)
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: No acceleration primitives defined.
waiting for X server to shut down
Any ideas ?
Matthias
