Hello everyone, Well after a couple of months I decided to connect to my ISP. I have a machine at the local firestation that I want to use as an IPMasq "server" and my home PC. Both have given me a bit of a problem. I am running Debian - hamm on both.
Fire Dept. box first: I can find the modem, it dials fine but this is the PPP log: Jan 30 21:15:49 FVFD_S2 pppd[480]: pppd 2.3.5 started by root, uid Jan 30 21:15:50 FVFD_S2 chat[483]: abort on (BUSY) Jan 30 21:15:50 FVFD_S2 chat[483]: abort on (NO CARRIER) Jan 30 21:15:50 FVFD_S2 chat[483]: abort on (VOICE) Jan 30 21:15:50 FVFD_S2 chat[483]: abort on (NO DIALTONE) Jan 30 21:15:50 FVFD_S2 chat[483]: abort on (NO ANSWER) Jan 30 21:15:50 FVFD_S2 chat[483]: send (ATZ^M) Jan 30 21:15:50 FVFD_S2 chat[483]: expect (OK) Jan 30 21:16:09 FVFD_S2 chat[483]: ATZ^M^M Jan 30 21:16:09 FVFD_S2 chat[483]: OK Jan 30 21:16:09 FVFD_S2 chat[483]: -- got it Jan 30 21:16:09 FVFD_S2 chat[483]: send (ATDT6859500^M) Jan 30 21:16:09 FVFD_S2 chat[483]: expect (CONNECT) Jan 30 21:16:09 FVFD_S2 chat[483]: ^M Jan 30 21:16:49 FVFD_S2 chat[483]: ATDT6859500^M Jan 30 21:16:49 FVFD_S2 chat[483]: CONNECT Jan 30 21:16:49 FVFD_S2 chat[483]: -- got it Jan 30 21:16:49 FVFD_S2 chat[483]: send (\d) Jan 30 21:16:50 FVFD_S2 pppd[480]: Serial connection established. Jan 30 21:16:51 FVFD_S2 pppd[480]: Using interface ppp0 Jan 30 21:16:51 FVFD_S2 pppd[480]: Connect: ppp0 <--> /dev/ttyS2 Jan 30 21:16:51 FVFD_S2 pppd[480]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xea159cb8> <pcomp> <accomp>] Jan 30 21:17:18 FVFD_S2 last message repeated 9 times Jan 30 21:17:21 FVFD_S2 pppd[480]: LCP: timeout sending Config-Requests Jan 30 21:17:21 FVFD_S2 pppd[480]: Connection terminated. Jan 30 21:17:21 FVFD_S2 pppd[480]: Receive serial link is not 8-bit clean: Jan 30 21:17:21 FVFD_S2 pppd[480]: Problem: all had bit 7 set to 0 Jan 30 21:21:50 FVFD_S2 pppd[480]: Exit. I looked at my Win98 DUN setup and it is using 8N1 for bit settings. I do not know where to go in PPP to play with the bit settings. My home PC is more fun! I got a Zoom 56K - PCI DualModem for Christmass to replace a Toshiba WinModem. It appears to be plug and play. Windows98 assigns it to COM 4, IRQ 10. Linux does not see it at all during boot. I have tried booting to Win98 then loadlin but I still do not get the modem. Any suggestions? Thanks, -- Danny R. Gray Research Technician Department of Pathology UNC-CH School of Medicine
