Hi,
Can anyone help me how I have to interpret the output of the
(Matrox) X-server. I start but crashes. but how to interpret all the
messages it produces?. Is there a document that explains this ??
I have attached the output of my Matrox X-server as an example.
Many thanks.
Regards,
Marc
____________________________________________________
ir. Marc Fleureck [EMAIL PROTECTED]
tel: +32-(0)2-2085311 fax: +32-(0)2-2085320
____________________________________________________
XFCom_Matrox Version 2.2/ X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: 1 October 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. Please report problems to [EMAIL PROTECTED]
Operating System: Linux 2.1.51 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100
(using VT number 7)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(fr)" (overrides other XKB settings)
(**) Mouse: type: Busmouse, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "Matrox Millennium G200 8MB"
(**) SVGA: Monitor ID: "CPD-200GST"
(--) SVGA: Mode "640x480" needs vert refresh rate of 100.02 Hz. Deleted.
(--) SVGA: Mode "800x600" needs vert refresh rate of 100.03 Hz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) SVGA: PCI: Matrox MGA G200 AGP rev 1, Memory @ 0xcf000000, 0xce000000
(--) SVGA: Linear framebuffer at 0xCF000000
(--) SVGA: MMIO registers at 0xCE000000
(--) SVGA: Video BIOS info block at 0x000c7a60
(--) SVGA: Found and verified enhanced Video BIOS info block
(--) SVGA: detected an SGRAM card
(--) SVGA: chipset: mgag200
(**) SVGA: videoram: 8192k
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Using 8 bits per color component
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 888
(--) SVGA: Maximum allowed dot-clock: 250.000 MHz
(**) SVGA: Mode "640x480": mode clock = 31.500
(**) SVGA: Mode "800x600": mode clock = 60.750
(**) SVGA: Mode "1024x768": mode clock = 98.900
(**) SVGA: Mode "1280x1024": mode clock = 135.000
(--) SVGA: Virtual resolution set to 1280x1024
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: Read OPTION 0x4007cd21
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (TE/NonTE imagetext, TE/NonTE
polytext)
(--) SVGA: XAA: Using 10 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: General lines and segments
(--) SVGA: XAA: Dashed lines and segments
waiting for X server to shut down FreeFontPath: FPE
"/usr/X11R6/lib/X11/fonts/misc/" refcount is 2, should be 1; fixing.
