Richard Black wrote:
>
> Hi
>
> I have got my sound card (a soundblaster 32 PnP) up and running (with
> the 2.1.125 kernal). Is there a way to check whether the card is just
> running like a sb16 (if indeed this is a meaningful question) os as a
> sb32? My /dev/sndstat is below.
Basically, a SBAWE32 _is_ a SB16. Sorta. The DSP is the same as a
SB16, but you have the WaveTable MIDI stuff.
Here's my /etc/isapnp.conf
(READPORT 0x0203)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
# This configures the SB16 audio part
(CONFIGURE CTL0045/62180365 (LD 0
(INT 0 (IRQ 5 (MODE +E)))
(DMA 0 (CHANNEL 1))
(DMA 1 (CHANNEL 5))
(IO 0 (SIZE 16) (BASE 0x0220))
(IO 1 (SIZE 2) (BASE 0x0330))
(IO 2 (SIZE 4) (BASE 0x0388))
(NAME "CTL0045/62180365[0]{Audio }")
(ACT Y)
))
# This sets up my AWE Wave. Notice the extra entries that pnpdump don't
find.
# I got them from the AWE-HOWTO, and they work for me.
(CONFIGURE CTL0045/62180365 (LD 2
(IO 0 (SIZE 4) (BASE 0x0620))
(IO 1 (SIZE 4) (BASE 0x0A20))
(IO 2 (SIZE 4) (BASE 0x0E20))
(NAME "CTL0045/62180365[2]{WaveTable }")
(ACT Y)
))
(WAITFORKEY)
Here's the /etc/conf.modules I use to auto-load the sound, sb16, and
awe_wave modules on demand (and even load the AWE samplebanks too!)
alias sound sb
alias char-major-14 sb
options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330
# When a program looks for the synth device, load the AWE driver
alias synth0 awe_wave
# Load the samples too, so we can hear stuff. :)
post-install awe_wave /usr/bin/sfxload /usr/lib/awe/sfbank/synthgm.sbk
# In case we want to use the old FM Synth
options opl3 io=0x388
These work for me, using 2.1 and kmod, but should work the same if
you're using kerneld.
Hope that this works for you...
--
[EMAIL PROTECTED] -- PGP and GPG public keys at http://meta-x.net/keys/
