On Mon, 23 Nov 1998, Amanda Shuler wrote: : I have a question about ifconfig. : I have a machine that I am trying to configure to put onto a local : network. : I'm an assigning it IP address 192.168.76.76 : I type: : ifconfig eth0 192.168.76.76 : : then I check it with ifconfig and everything is correct. I reboot the : machine, and recheck ifconfig -- it's wrong. It resets the IP address to : 192.168.1.1 everytime! : : Currently, I do not have this machine physically hooked up to the network, : because I was just doing the configuration and I didn't want to knock : another (very important) machine off the network. If the ethernet card is : not actually hooked up to the network, will that cause this "reset" to : happen upon every boot? : : How do I get it to stay at 192.168.76.76?
Cool; the same question twice. Edit /etc/init.d/network -- Nathan Norman MidcoNet 410 South Phillips Avenue Sioux Falls, SD mailto:[EMAIL PROTECTED] http://www.midco.net finger [EMAIL PROTECTED] for PGP Key: (0xA33B86E9)
