I have a HP LJ5M connected directly to the network.
I configured everything as described in HowTo and on THAT day it worked
fine!
After rebooting my computer I can:
telnet to the printer and change any parameters I wish.
check with lpq that:
Printer: lj-5 is [EMAIL PROTECTED]
JetDirect lpd: no entries
but I can't:
print.
All I get is a page with 2-3 lines of pure text (with the "staircase
effect"), even though I send it as PostScript.
Can anybody help me with that?
My `/etc/printcap' is attached.
Blazej
# /etc/printcap: printer capability database. See printcap(5).
# You can use the filter entries df, tf, cf, gf etc. for
# your own filters. See the printcap(5) manual page for further
# details.
lp|Generic dot-matrix printer entry
:lp=/dev/lp1
:sd=/var/spool/lpd/lp
:af=/var/log/lp-acct
:lf=/var/log/lp-errs
:pl#66
:pw#80
:pc#150
:mx#0
:sh
# rlp|Remote printer entry
# :lp=
# :rm=remotehost
# :rp=remoteprinter
# :sd=/var/spool/lpd/remote
# :mx#0
# :sh
#
# BS:
lj-5|remote-hplj
:lp=/dev/null
:sh
:sd=/var/spool/lpd/lj-5
:rm=148.81.68.136
:rp=raw
