Matthew Myers writes: > Could someone send me some working diald config files and scripts or > point me in the right direction to find some?
Here is my /etc/diald.options: # /etc/diald/diald.options # This is the port the modem is connected to. # *** MODIFY to match your set up *** device /dev/ttyS2 # diald log file: do not change. accounting-log /var/log/diald.log # diald monitoring pipe: do not change. fifo /var/run/diald.fifo # This turns on full debugging. debug 77 # We have PPP mode ppp # IP number (a dummy to make diald happy) local 10.0.0.1 # IP number for the provider's machine. This is different each time we connect. # This is not a problem, but it'll make the routine table look funny. remote 10.0.0.2 netmask 255.255.255.0 # If the connection gets broken from the ISP, redial only # if there's outgoing traffic from our side. two-way # When the link's up, change routes to point to the real link # instead of the proxy. reroute # diald should set a default route to the proxy SLIP link. defaultroute # These two scripts must be executable. # They are not required. # ip-up /etc/diald/ip-up # ip-down /etc/diald/ip-down # Script used to bring up the serial line. connect "chat -v -f /etc/chatscripts/provider" # Do UUCP locking. lock # We connect through a modem. modem crtscts # Local tweaking connect-timeout 90 dial-fail-limit 2 died-retry-count 0 # Add options to pass to pppd here. 'noauth' is almost always required. pppd-options noauth include /etc/diald/standard.filter dynamic -buffer-packets # End of /etc/diald/diald.options You probably don't need to change any of the other files in /etc/diald. -- John Hasler This posting is in the public domain. [EMAIL PROTECTED] Do with it what you will. Dancing Horse Hill Make money from it if you can; I don't mind. Elmwood, Wisconsin Do not send email advertisements to this address.
