Hi,
>>"Ed" == Ed Cogburn <[EMAIL PROTECTED]> writes:
Ed> 'plog -f' will show the connect speed in its output. Use ctl-c to exit
Ed> when done.
__> plog -f
Oct 26 17:45:17 tiamat diald[2284]: Running pppd (pid = 3742).
Oct 26 17:45:17 tiamat diald[3742]: Running pppd: /usr/sbin/pppd -detach modem
crtscts mtu 1500 mru 1500
Oct 26 17:45:17 tiamat pppd[3742]: pppd 2.3.5 started by root, uid 0
Oct 26 17:45:17 tiamat pppd[3742]: Using interface ppp0
Oct 26 17:45:17 tiamat pppd[3742]: Connect: ppp0 <--> /dev/ttyS0
Oct 26 17:45:26 tiamat pppd[3742]: Remote message: Login Succeeded
Oct 26 17:45:26 tiamat pppd[3742]: local IP address 206.96.246.252
Oct 26 17:45:26 tiamat pppd[3742]: remote IP address 206.96.246.241
Oct 26 17:45:27 tiamat diald[2284]: New addresses: local 206.96.246.252, remote
206.96.246.241.
Oct 26 17:54:00 tiamat diald[2284]: FIFO: Unblock request received.
I can't determine cnnect speed from that, though. ;-(
manoj
--
To be loved is very demoralizing. Katharine Hepburn
Manoj Srivastava <[EMAIL PROTECTED]> <http://www.datasync.com/%7Esrivasta/>
Key C7261095 fingerprint = CB D9 F4 12 68 07 E4 05 CC 2D 27 12 1D F5 E8 6E
