Jens Ritter wrote:
> Phillip Neumann <[EMAIL PROTECTED]> writes:
>
> Please check the mail archive.
>
> As far as I read, you have to restart xringd, so it gets the
> back to the modem.
>
> --
> [EMAIL PROTECTED] [EMAIL PROTECTED]
> KeyID: 2048/E451C639 1998/01/28
> Print: 5F 3D 43 1E 24 1E CC 48 1E 05 93 3A A7 10 73 37
> Here is a patch for one of the nastiest 2.1 (and earlier)
> problems: the uptime counter wraps back to zero after 497 days. The
> heartbreak of seeing that carefully-nurtured uptime go to zero is not
> something that should be inflicted on anybody.
> -- http://lwn.net/ August 27, 1998
Hello....
You mean this:
>There was a discussion on this over
>the last week or two. In the /etc/ppp/ip-up.d directory create a shell
>script that calls '/etc/init.d/xringd stop > /dev/null' and in the
>/etc/ppp/ip-down.d directory create a shell script that run
>/etc/init.d/xringd start > /dev/null'. It is necessary to restart the
>xringd deamon so it regains control of the modem, thus the stop and
>start.
>
>Hope that helps,
>
>Brian
Well i thoght that doing that stuff in /etc/init.d would do it
autimatically.... now i dont understand that are the script for...
So you mean i should kill or turn off xringd before using pon?? well if i do
that xringd will be turned off and it will not execute pon.....
So then i should do something like this. Xringd shuold not execute pon, i could
execute a script that could be somthing like:
xringd stop
pon
If so now how could i say xringd to restart after doing a poff ?? (i am not at
home at this moment...)
What am i doing wrong?? xringd doesnt want to work !!
Thanks,
--
__________________________________________
/ /
/ Phillip Neumann /
/ [EMAIL PROTECTED] /
_____________________/_____________________________/
