Sorry, if this was posted twice! Hi,
I am trying to install Debian 2 on my computer. However when I select "Next: Partition a Hard Disk" from the installation menu I get a message that no hard disks where found. I have a DAWICONTROL DC-2975 U SCSI Controler with a CDROM and an IBM UW HD connected to it. The HD is connected via an U to UW adapter. Below is more information to the problem. Any clues what is causing this? Thanks for any advice, Felix The file "boot.bat" which I call from DOS: > @echo off > smartdrv /c > loadlin.exe linux ro ncr53c8xx=wide:0 initrd=root.bin root=/dev/ram The startup messages I get in LINUX: > ncr53c8xx: at PCI bus 0, device 12, function 0 > ncr53c8xx: 53c875 detected > ncr53c875-0: rev=0x04, base=0xdd800000, io_port=0xd400, irq=11 > ncr53c875-0: ID 6, Fast-20, Paritiy Checking > ncr53c875-0: on-board RAM at 0xdd000000 > ncr53c875-0: restart (scsi reset). > ncr53c875-0: copying script fragments into the on-board RAM ... > scsi0 : ncr53c8xx - revision 2.4a > scsi : 1 host. > Vendor: PIONEER Model: CD-ROM DR-U16S REV: 1.01 > Type: CD-ROM ANSI SCSI revision: 02 > Detected scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0 > scsi : detected 1 SCSI cdrom total.
