I have done it for my Aztech's WaveRider card. It required a change in
driver's source:
I have modified the dev_table.h file to define the second DMA channel for
MSS compatible cards the patch follows:
19c19
<
---
> #define MSS_DMA2 (0)
421c421
< {SNDCARD_MSS, {MSS_BASE, MSS_IRQ, MSS_DMA,
-1},SND_DEFAULT_ENABLE},
---
> {SNDCARD_MSS, {MSS_BASE, MSS_IRQ, MSS_DMA,
> MSS_DMA2},SND_DEFAULT_ENABLE},
Of course you may modify the MSS_DMA2 value adjusting it according to
your needs.
I hope this will help...
Wojtek Zabolotny
[EMAIL PROTECTED]
On Mon, 28 Sep 1998, Joe Lillibridge wrote:
> I've been trying for a long long time to record with my CS4231 MSS/WSS
> sound card.
>
> My BIOS says that WSS Capture DMA is 1. Play is 0. On boot,
> I get this message.
>
> <MSS audio codec (CS4231)> at 0x534 irq 11 dma 0,0
>
> I assume it should read: <MSS audio codec (CS4231)> at 0x534 irq 11 dma 0,1
>
> There's only one entry for MSS DMA though. How can I fix this?
>
> joe
>
>
> --
> Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
>
>
