Hi! My problem is:
I installed bo (kernel 2.29-6) without Problems on my Austin Laptop (Phenix BIOS) 640k+3Mb (Installation with the rescue floppy to load lowmemroot. The first installation menu (partition, swap, temp_root) is already flanked by a alt-f2 sh and a alt-f3 error. ok ... Initialization of swap and temp_root is verified by messages) Now I tried to install hamm 2.34-4 lowmem and ran into problems. I cannot proceed beyond the partition program. I do not get alt-f2 sh and a alt-f3 error virtuals ... Initialization of swap is not verified. I can start the dd to the temp_root but there seem to be only some attempts to dump from the floppy. It is definitely not done! a boot from floppy (rescue root=/dev/fd0) results in: "unable to open an initial console" I tried a trick and dumped the hamm lowmem floppy to the temp_root using the bo diskdump! then I booted from harddisk using the rescue floppy. I could configure the installation as usual and rebooted. before the appearence of the login prompt I got: "cannot convert tty to tty01" (similar at all other virtuals) I could not log in! Sorry for the long story but this is really weird! Anyone got an Idea what to do ? Thanks and cu Anton -- +-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+ : Anton J. Gamel : <[EMAIL PROTECTED]> o o : : ------------------------ : <[EMAIL PROTECTED]> V : : an Apollo & a VAX for a Vet : (,,) : +-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=---""--+
