I have problems mounting my CD.
Here is a snip of the boot process:
ide: i82371 PIIX (Triton) on PCI bus 0 function 9
ide0: BM-DMA at 0xe000-0xe007
ide1: BM-DMA at 0xe008-0xe00f
hda: FUJITSU MPA3026ATU, 2503MB w/0kB Cache, CHS=635/128/63, DMA
hdb: FUJITSU MPA3026ATU, 2503MB w/0kB Cache, CHS=635/128/63, DMA
hdc: Pioneer CD-ROM ATAPI Model DR-A24X 0101, ATAPI CDROM drive
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
When I the try: mount /cdrom with proper settings in /etc/fstab after a
while I get
hdc: irq timeout: status=0x51
hdc: irq timeout: error=0x60
hdc: irq timeout: status=0x50
hdc: irq timeout: status=0x50
hdc: irq timeout: status=0x50
hdc: ATAPI reset complete
hdc: irq timeout: status=0x50
hdc: irq timeout: status=0x50
hdc: irq timeout: status=0x50
hdc: irq timeout: status=0x50
hdc: ATAPI reset complete
hdc: irq timeout: status=0x50
end_request: I/O error, dev 16:00, sector 0
.
.
.
And after 10-15 minutes the mount process core-dumps.
Karsten
--
*******************************************************
Familien Bolding Phone: +39 0332 225090
Via Adda 31 E-mail: [EMAIL PROTECTED]
I-21100 Varese E-mail: [EMAIL PROTECTED]
Italien
*******************************************************
