* Florian Struck ([EMAIL PROTECTED]) wrote: > Hash: SHA1 > > Model: > Canon S400 (K10186 written on the bottom) > > Canon.ppd in ppd directory? i can send it to you but it actually looks > allright.
In /usr/share/cups/model/Canon are the drivers. I think your best bet is the one listed first, which is S400-bjc600.ppd. What I did was copy the driver to /etc/cups/ppd and then symlinked Canon.ppd to it (you don't have to copy it -- the symlink is sufficient; I just wanted both in the same place). That way I knew that Canon.ppd was correct. > I btw succeeded in getting the page fit to the sheet using a foomatic driver > but the output is very bad quality. And i earlyer too had best quality with > gimpprint driver so i want to keep it but still after setting the page size > to A4 with the gimpprint driver i get only upper left quarter printed over > the whole sheet. I have not tried the gimpprint driver -- maybe I should do that before I go any further. > The bailing out of the http interface is still happenning always but it > changes the settings anyway after a while when i exit and enter the interface> again. > One more question i have is how do i enable the server so that i have access > from another machine on the LAN? You have to install everything on the other machine as well, and when you add the printer, use ipp://name.of.server/printers/xxx is whatever name you have given the printer. Once I got the name right, everything just worked. HTH Cam -- Cam Ellison Ph.D. R.Psych. From Roberts Creek on B.C.'s incomparable Sunshine Coast [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
