On Tue, 8 Sep 1998, Richard Heller wrote: [ snip ] : Hey,
Hey! Your lines are too long :) : I have a 3COM 3c905TX network card and a Real3D StarFighter video : card. When I boot my machine, the PCI probe gives both of the cards : the same IRQ number. However, the network card is on bus 0 and the : video card is on bus 1. Are the different bus numbers because the : network card is PCI and the video card is AGP? Would this setup : cause an IRQ conflict under Linux? The network card currently : appears to be complaining about an IRQ conflict. Is there any way to : force the two cards to have a different IRQ? I tried setting the IRQ : they're usually given to be non-PCI and they still ended up with the : same IRQ, just a different number. have you tried moving the NIC to a different PCI slot? I believe there are recorded conflicts on many systems with an AGP slot. -- Nathan Norman MidcoNet 410 South Phillips Avenue Sioux Falls, SD mailto:[EMAIL PROTECTED] http://www.midco.net finger [EMAIL PROTECTED] for PGP Key: (0xA33B86E9)
