I can't make a ppp connection. This is a sample of my PPP.LOG Jul 18 09:48:39 Hal-9000 pppd[157]: unrecognized option 'ok' Jul 18 09:50:11 Hal-9000 pppd[162]: pppd 2.3.5 started by root, uid 0 Jul 18 09:50:43 Hal-9000 pppd[162]: Terminating on signal 15. Jul 18 09:50:44 Hal-9000 pppd[162]: Exit. Jul 18 09:50:50 Hal-9000 pppd[165]: pppd 2.3.5 started by root, uid 0 Jul 18 09:50:50 Hal-9000 pppd[165]: Using interface ppp0 Jul 18 09:50:50 Hal-9000 pppd[165]: Connect: ppp0 <--> /dev/tty1 Jul 18 09:51:11 Hal-9000 pppd[165]: Terminating on signal 15. Jul 18 09:51:17 Hal-9000 pppd[165]: Connection terminated. Jul 18 09:51:17 Hal-9000 pppd[165]: Receive serial link is not 8-bit clean: Jul 18 09:51:17 Hal-9000 pppd[165]: Problem: all had bit 7 set to 0 Jul 18 09:51:18 Hal-9000 pppd[165]: Exit. Jul 18 09:51:44 Hal-9000 pppd[171]: pppd 2.3.5 started by root, uid 0 Jul 18 09:51:45 Hal-9000 chat[172]: abort on (BUSY) Jul 18 09:51:45 Hal-9000 chat[172]: abort on (NO CARRIER) Jul 18 09:51:45 Hal-9000 chat[172]: abort on (VOICE) Jul 18 09:51:45 Hal-9000 chat[172]: abort on (NO DIALTONE) Jul 18 09:51:45 Hal-9000 chat[172]: abort on (NO ANSWER) Jul 18 09:51:45 Hal-9000 chat[172]: send (ATZ^M) Jul 18 09:51:45 Hal-9000 chat[172]: expect (OK) Jul 18 09:52:30 Hal-9000 chat[172]: alarm Jul 18 09:52:30 Hal-9000 chat[172]: Failed Jul 18 09:52:30 Hal-9000 pppd[171]: Connect script failed Jul 18 09:52:31 Hal-9000 pppd[171]: Exit. Jul 18 09:59:56 Hal-9000 pppd[138]: pppd 2.3.5 started by root, uid 0 Jul 18 09:59:56 Hal-9000 pppd[138]: Using interface ppp0 Jul 18 09:59:56 Hal-9000 pppd[138]: Connect: ppp0 <--> /dev/tty1 Jul 18 10:00:26 Hal-9000 pppd[138]: LCP: timeout sending Config-Requests
Jul 18 10:00:26 Hal-9000 pppd[138]: Connection terminated. Jul 18 10:00:26 Hal-9000 pppd[138]: Receive serial link is not 8-bit clean: Jul 18 10:00:26 Hal-9000 pppd[138]: Problem: all had bit 7 set to 0 Jul 18 10:00:27 Hal-9000 pppd[138]: Exit. Jul 18 13:35:17 Hal-9000 pppd[136]: pppd 2.3.5 started by root, uid 0 Jul 18 13:35:18 Hal-9000 chat[137]: abort on (BUSY) Jul 18 13:35:18 Hal-9000 chat[137]: abort on (NO CARRIER) Jul 18 13:35:18 Hal-9000 chat[137]: abort on (VOICE) Jul 18 13:35:18 Hal-9000 chat[137]: abort on (NO DIALTONE) Jul 18 13:35:18 Hal-9000 chat[137]: abort on (NO ANSWER) Jul 18 13:35:18 Hal-9000 chat[137]: send (ATZ^M) Jul 18 13:35:18 Hal-9000 chat[137]: expect (OK) Jul 18 13:36:03 Hal-9000 chat[137]: alarm Jul 18 13:36:03 Hal-9000 chat[137]: Failed Jul 18 13:36:03 Hal-9000 pppd[136]: Connect script failed Jul 18 13:36:04 Hal-9000 pppd[136]: Exit. I type pon and nothing happens. I tryed running pppconf and I put all the info in again. I think I did have a com port conflict but I disabled the m/b com 2 and IRQ 3(the ones my modem uses) and it show up correctly during boor up but no change to the problem. Any words of wisdom? -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
