Hi list!
Sometime after upgrading do 2.0 beta I started to have some strange
problems on my gateway machine. This condition can be described as a
"race" in eth0's collisions and frame values (see below for ifconfig)
that starts a couple minutes after boot. This is driving telnet and
other network connections in the gateway box to a halt.
I think this is not cable (BNC) related as my other 2 machines can ping
each other.
Is there any problem with 2.0 beta 1 that can leads to this kind of
problem? Or am I doing something stupid here?
I first installed 2.0 beta 1 and yesterday did a ftp dselect do get new
packages.
Im using bind, ipmasquerading and squid on the machine.
Can someone help me?
[]s
----- route -n
200.251.222.131 0.0.0.0 255.255.255.255 UH 0 0 0
ppp0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 1
eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 2
lo
0.0.0.0 200.251.222.131 0.0.0.0 UG 0 0 2
ppp0
------ ipfwadm -F -p
IP firewall forward rules, default policy: deny
type prot source destination ports
acc/m all localnet/24 anywhere n/a
----- ifconfig:
lo Link encap:Local Loopback
inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1
RX packets:77 errors:0 dropped:0 overruns:0 frame:0
TX packets:77 errors:0 dropped:0 overruns:0 carrier:0
Collisions:0
eth0 Link encap:Ethernet HWaddr 00:20:18:63:0E:A8
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:826 errors:0 dropped:0 overruns:0 frame:5444
TX packets:640 errors:0 dropped:0 overruns:0 carrier:0
Collisions:0
Interrupt:9 Base address:0x240
ppp0 Link encap:Point-to-Point Protocol
inet addr:200.251.222.167 P-t-P:200.251.222.131
Mask:255.255.255.0
UP POINTOPOINT RUNNING MTU:1500 Metric:1
RX packets:110 errors:0 dropped:0 overruns:0 frame:0
TX packets:107 errors:0 dropped:0 overruns:0 carrier:0
Collisions:0
Memory:1418038-1418c04
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
