Hi, Having problems setting up ppp. I think its actually a unix problem rather than a hardware one, but this is my first try with a Linux system so may be wrong. Here's the details anyway:
I have a Sysprano internal modem with Rockwell chip set (uart is labelled RCV336ACF/SF). setserial reports: /dev/ttyS1, UART: 16550A, Port: 0x02f8, Baud_base 115200, close_delay: 50, divisor 0, IRQ 3, closing_wait 3000, closing_wait2 infinite, Flags: spd_normal, skip_list, session_lockout When I start 'pon', the modem beeps as if engaged but never dials a number. 'plog' reports: abort on (NO DIALTONE) send (ATDT^M) expect (<my ISPs phone no>) pppd2.0 started by root, uid 0 Device ttyS1 is locked by pid 170 Exit ATDT^M^M Busy -- failed Failed (Busy) Connect script failed The process that seems to be causing the problem is: sbin/mgetty ttyS1 but I don't know why this is running, what its doing, and I can't find where its started up from. Any help appreciated! Graham -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
